Cisco 4948 Datasheet page 8

BGP4-MIB
CISCO-BULK-FILE-MIB
CISCO-CLASS-BASED-QOS-MIB
CISCO-FTP-CLIENT-MIB
CISCO-HSRP-MIB
CISCO-IGMP-FILTER-MIB
CISCO-IPMROUTE-MIB
CISCO-PORT-SECURITY-MIB
CISCO-RMON-CONFIG-MIB
CISCO-VTP-MIB
ETHERLIKE-MIB
EXPRESSION-MIB
CISCO-PORT-STORM-CONTROL-MIB
IS-IS MIB
RIP SNMP MIB
Industry Standards
Ethernet—IEEE 802.3 and 10BASE-T
Fast Ethernet—IEEE 802.3u, 100BASE-TX, and 100BASE-FX
Gigabit Ethernet—IEEE 802.3z and 802.3ab
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w rapid reconfiguration of spanning tree
IEEE 802.1s multiple VLAN instances of spanning tree
IEEE 802.3ad LACP
IEEE 802.1p class-of-service (CoS) prioritization
IEEE 802.1Q VLAN
IEEE 802.1x user authentication
X2 support
RMON I and II standards
Indicator and Port Specifications
System status—Green (operational); red (faulty)
Console—RJ-45 female
Reset (switch recessed protected)
Uplinks—Link and active
Image management port—10/100BASE-TX (RJ-45 female) data terminal equipment (DTE); green (good); orange (disabled); off (not connected)
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
© 2005 Cisco Systems, Inc. All rights reserved.
Page 8 of 14