1. Insert the USB C cable into the charger base socket. 2. Put the BioSense onto the charging base and align the metal contacts on the back of the smartband with the gold pins on the charging base while placing. the device and the charger will line up with magnets in the right direction.
Page 6
6. APP Download Download the VYVO Smart App from the App Store, Google Play Store or VYVO App STO. Note: To use “VYVO Smart App” on an iPad, you need to select “iPhone only” when down- loading it from the App Store 7.
Page 7
Power ON button ECG & BIA electrodes LED light BP, SpO2, APG sensor VYVO Pay chip inside...
Page 8
In order to monitor heart rate more accurately, please wear the smartband approximately one finger away from the wrist bone. NOTE BioSense is only lor swimming. lf you wear BioSense lor diving, it may cause damage to the device. Such damage is not within the scope of the warranty.
Page 9
NOTE 1. Swim, shower and washing hands only under cold water. 2. BioSense does not have a waterproofing effect on seawater, acid and alkaline solution, chemical reagents and other corrosive liquids. lf inadvertently encounter or contact with corrosive liquid, please clean with clear water and dry the device. The damage caused due...
Page 12
FUNCTIONS Support to turn on/off 24-hour automatic measurement, the automatic measurement interval is measured once every 10 minutes (the whole point: 00, 10...) Support manual measurement, app initiated Support turning on/off 24-hour automatic measurement (determined by whether the heart rate is turned on/off), and the automatic measurement interval is measured once every 10 minutes (the whole point: 00, 10...) Support manual measurement, app initiated Initiate the measurement from the APP, and touch the left and right electrode pads with your...
Page 13
APP settings, show alert by led light, send email SpO2 Body temperature Steps Calories APP display Stand pads on both sides respectively (write the measurement precautions on the APP and attach the operation gesture Distribute the left diagram) and right sides of the bracelet host, used for ECG/BIA measurement...
Page 14
LED LIGHT STATUS When manually starting SpO2/BP/APG/ECG measurement, the red light will light up after touching your finger R:255 - Low battery ≤20%, flash once every 5 Orange Flicker G:160 - B:0 minutes Bracelet charging, flicker once every 1 Flicker second R:90 Green...
Page 15
BioSense health smartband Device Manteinance Device care 1. Do not use any sharp objects to clean the device. 2. Avoid using chemical cleaners, solvent solutions or insect repellents that might damage plastic compo nents of the device. 3. Thoroughly rinse the device with clean water after exposure to chiarine, salt water, sunscreen, alcohol, cosmetics or any other harsh chemicals.
• If you have a pacemaker or other internal electronic device, consult with your physician before using a heart rate monitor. • The BioSense optical wrist heart rate monitor will occasionally emit green light and flashes. Consult with your physician if you have epilepsy or are sensitive to flashes of light.
Page 17
OS 5.0 or later and for Appie OS version 10.0 or later. 1. VYVO BioSense has a water resistance rating of 50 meters according to ISO standard 22810:2010. The devi ce can be used for shallow-water activities like swimming in a pool or ocean.
Need help?
Do you have a question about the BioSense and is the answer not in the manual?
Questions and answers