Do you have a question about the SIEVE SHAKER 300MM and is the answer not in the manual?
Questions and answers
Summary of Contents for labtest SIEVE SHAKER 300MM
Page 1
SIEVE SHAKER MOTORISED 300/200 MM MAKE: LABTEST UK Zeal international INSTRUCTION MANUAL INSTRUCTION MANUAL FOR SIEVE SHAKER 300/200MM...
Page 2
DESCRIPTION The unique action of this Sieve Shaker a circular motion to the material being sieved so that it makes a slow progression over the surface of the sieve. At the same time, a rapid vertical movement agitates the sample which assists in clearing the apertures. A time switch is incorporated to set tests of varying duration.
Page 3
Screw the rods fully into the location plate and tighten the nuts. Position the shaker on a suitable level rigid and robust surface (placing the machine on a level surface ensures even distribution of the sample over the sieves ) SAFETY CAUTIONS Whilst the test is in operation do not remover any covers or attempt to adjust any part of the machine.
Page 4
Photo: Sieve Shaker front Panel Front Panel Power warning light (green), illuminates when power is supplied to the machine. Mains warning light (red), illuminates when main switch is on and machine is ready to run. Timer 10-60 minutes turns clockwise to set duration of test, this also starts the machine providing that the mains switch is ON.
Page 5
Periodically lightly oil the clamping mechanisms and rods. CUSTOMER SUPPORT LABTEST technical services group is available for your technical questions. The technical service engineers are well-trained and experienced on Lab Test material testing equipments and should be able to answer your questions.
Need help?
Do you have a question about the SIEVE SHAKER 300MM and is the answer not in the manual?
Questions and answers