Advertisement

Quick Links

Instructions for Assembly, Testing, Operation, Servicing, and Storage
Ironton Disinfecting Sprayer: For use with disinfecting bleach
READ and UNDERSTAND the Owner's Manual completely before using this sprayer. Assemble,
test, and use only in accordance with the Owner's Manual instructions.
DO NOT mix bleach with any other chemicals. Not for use with any other chemicals. System designed
for use with disinfecting bleach concentrations only.
READ and FOLLOW chemical label instructions. Bleach is a hazardous chemical.
KNOW emergency procedures BEFORE handling chemicals. Sprayer leaks, bodily chemical
contact, poisoning, and spills require immediate response.
AVOID inhaling, ingesting, or coming into contact with any chemicals.
WEAR personal protective gear when filling, using, cleaning, and servicing the sprayer.
KEEP sprayer and spray materials away from children and pets
EXERCISE CAUTION in vehicle handling when towing/hauling a filled sprayer to avoid loss of
control or sprayer overturning.
DO NOT TURN ON POWER to sprayer until ready to spray in order to avoid unintentional spray
release.
ALWAYS keep a fire extinguisher rated "ABC" nearby.
Improper use of the sprayer or handling of chemicals could result in serious injury or illness to the
operator or nearby persons/animals or could cause damage to the environment.
Only use the cable clamps provided with the sprayer to connect it with the battery.
**This sprayer is recommended for use in spraying bleach. The sprayer will be damaged, and warranty voided if used to
apply any petroleum-based product (gasoline, diesel, kerosene, or oil). The sprayer should not be used to transfer any
product intended for human consumption. THE SPRAYER MUST NOT BE USED FOR OTHER PURPOSES ONCE
IT HAS BEEN USED FOR SPRAYING BLEACH. Any chemical will leave some residual in the tank liner or sprayer
components, even after the sprayer has been properly cleaned. These residual chemicals can have unexpected effects on
future uses. This sprayer should not be used by people with reduced physical, sensory or mental capabilities or lack of
experience and knowledge.
Any Questions, Comments, Problems, or Parts Orders
Owner's Manual
solutions up to 1800ppm**
Call Ironton Product Support 1-877-234-6869.
M999885A
MODEL NUMBER: 999885
SERIAL NUMBER: ___________
WARNING

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 999885 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ironton 999885

  • Page 1 MODEL NUMBER: 999885 SERIAL NUMBER: ___________ Owner’s Manual Instructions for Assembly, Testing, Operation, Servicing, and Storage Ironton Disinfecting Sprayer: For use with disinfecting bleach solutions up to 1800ppm** WARNING READ and UNDERSTAND the Owner's Manual completely before using this sprayer. Assemble, test, and use only in accordance with the Owner's Manual instructions.
  • Page 2 Hazard Signal Word Definitions...
  • Page 3: Table Of Contents

    Table of Contents Intended Use .......................... 4 Summary of Important Safety Information ................. 5 During Assembly During Operation • General Chemical Safety • Chemical Application Safety • ATV Vehicle Handling Safety • Chemical Accident Procedures Warning Label Location ......................8 Unpacking Components ..........................
  • Page 4: Intended Use

    NOTE: The sprayer will be damaged, and warranty voided, if used to apply any petroleum-based product (gasoline, diesel, kerosene, or oil). Contact Ironton Product Support at 1-877-234-6869 for any questions about the appropriate use of the sprayer and/or optional accessories.
  • Page 5: Summary Of Important Safety Information

    Summary of Important Safety Information WARNING Read and understand this owner's manual completely before using the sprayer. Read each chemical label's instructions before handling the chemical. Improper use of the sprayer or handling of chemicals could result in serious injury or illness for the operator or nearby persons/animals, or cause damage to the environment.
  • Page 6: Chemical Application Safety

    Summary of Important Safety Information Chemical Application Safety Before Spraying • INSPECT and PREPARE sprayer before each use as directed in this manual. • DO NOT TURN ON POWER to sprayer until ready to spray in order to avoid unintentional spray release.
  • Page 7: Chemical Accident Procedures

    Summary of Important Safety Information Chemical Accident Procedures Immediate response is necessary in the event of sprayer leaks, bodily chemical contact, poisoning, or spills. See instructions below: Sprayer leak If the sprayer develops a leak, immediately stop spraying. Turn off power to the sprayer and follow directions below, as applicable.
  • Page 8: Warning Label Location

    Always make sure safety labels are in place and in good condition. If a safety label is missing or not legible, order new labels or unsafe operation could result. To order replacement safety labels, call Ironton Product Support at 1-877-234-6869.
  • Page 9: Unpacking

    Note that some parts are shipped inside the tank. • If you have damaged components: Contact the freight company that delivered the unit and file a claim. • If you have missing components: Contact Ironton Product Support at 1-877-234-6869. Gun Hose Sprayer Spray Gun 798874...
  • Page 10: Unpacking The Manual Bag

    Unpacking the Manual Bag The following items are found in the manual bag. M5 x 10mm Screw Gun Clip Hook & Loop Set Drain Cap & Washer 779779 778560 35363 37680, 5232 (Qty 3) (Qty 2) (Qty 1) (Qty 1) Hose Guide Hose clamp, 3/8"...
  • Page 11: Assembly

    Assembly Step 1: Attach gun clips to tank 1. Fasten the gun clips to the sprayer tank with screws. Gun clip Screw Step 2: Attach drain cap to tank Thread the drain cap onto the tank. Drain Cap...
  • Page 12: Step Three: Attach Gun Hose To Pump

    Assembly Step 3: Attach gun hose to pump 1. Slide hose clamp over one end of the gun hose. 2. Push the hose onto the pump hose barb. 3. Slide the hose clamp over the hose barb. 4. Tighten the hose clamp. Hose Barb Hose Clamp Gun Hose...
  • Page 13: Step Five: Attach Gun Hose To Spray Gun

    Assembly Step 5: Attach gun hose to spray gun 1. Slide hose clamp over the end of the gun hose. 2. Push the hose onto the gun hose barb. 3. Slide the hose clamp over the hose barb. 4. Tighten the hose clamp. Hose barb Spray gun Hose clamp...
  • Page 14: Step Seven: Connect Remote Switch To Battery

    Assembly Step 7: Connect remote switch to battery (battery not included) WARNING Batteries are hazardous because they contain caustic acid, can emit explosive gases, and can cause electric shock. Caution must be exercised when making connections to a battery to avoid shock and contact with the acid, and to prevent any sparking that could lead to an explosion.
  • Page 15: Step Eight: Check And Test Completed Assembly

    Assembly 6. Attach sprayer If you have not yet mounted the sprayer to your vehicle, do so at this time following the instructions in “Step 6: Attach Sprayer to a wagon, cart, or to a wagon, cart, or vehicle if you vehicle haven’t yet 7.
  • Page 16: Machine Components

    Machine Components 1. Hose Wrap. The hose wrap is built into the tank and provides a storage location for the gun hose 2. Gun Hose. The gun hose transfers chemical from the pump to the spray gun. 3. Fill Cap. The fill cap has a vent to allow air to enter the tank as the chemical is dispensed. 4.
  • Page 17: Operation-Important Safety Information

    Operation – Important Safety Information Now that you have completed and tested your assembly, there is some important safety and health information you need to know regarding handling and spraying chemicals, as well as vehicle handling with the sprayer attached. WARNING Carefully read and make sure you understand the following safety information before using the sprayer.
  • Page 18: Chemical Application Safety

    Operation – Important Safety Information (continued) Chemical Application Safety: WARNING • Caution must be used when spraying chemicals to avoid unsafe exposure to humans and the environment • Heed the warnings below and follow all instructions carefully. Before Spraying • Sprayer prep.
  • Page 19: Atv Vehicle Handling Safety

    Operation – Important Safety Information (continued) ATV Vehicle Handling Safety (if sprayer is mounted on an ATV): WARNING • Serious injury can occur if the ATV on which the sprayer is mounted is driven unsafely. • Follow the instructions below for safely towing the sprayer. •...
  • Page 20 Operation – Important Safety Information (continued) Poisoning by In case of poisoning from ingestion or inhalation: ingestion or inhalation IF THE VICTIM HAS COLLAPSED OR IS NOT BREATHING, CALL 911. Otherwise: 1. If you are the victim, immediately seek assistance from nearby personnel because you may become incapacitated.
  • Page 21: Preparing The Sprayer For Each Use

    Inspect hoses for exposed mesh and holes. Replace all worn or damaged hoses. b) Inspect tank and fittings for cracks and leaks. Replace all damaged fittings with original Ironton parts. c) Check to be sure retaining nut on gun nozzle is tight.
  • Page 22: Step One: Assess Wind Conditions And Clear Work Area

    Operation – Using the Sprayer Step 1: Assess wind conditions (if sprayer outdoors) and clear work area. Before you decide to spray, you must determine whether wind conditions are suitable. You must also restrict access to the work area to ensure the safety of bystanders. WARNING Do not spray if wind speeds are greater than 4 MPH or if there are bystanders in the intended spray area.
  • Page 23: Step Two: Fill The Sprayer

    Operation – Using the Sprayer Step 2: Fill the sprayer. WARNING • ALWAYS wear personal protective equipment as directed on the chemical label when handling chemicals. • Long pants and sleeves, chemical resistant gloves, and eye protection are strongly recommended. Additional protective gear may be required. Fill the sprayer using the following steps: Review the Operation –...
  • Page 24 Operation – Using the Sprayer 8. Fill tank Add chemical to tank through fill cap: 1. Confirm the chemical/water dilution ratios specified on the chemical label. The sprayer is rated for disinfecting bleach concentrations up to 1800ppm. 2. Determine chemical and water volumes needed for the planned application, taking into consideration that maximum tank capacity is 5 gallons.
  • Page 25: Step Three: Operate The Sprayer

    Operation – Using the Sprayer (continued) Step 3: Operate the sprayer. WARNING • ALWAYS wear personal protective equipment as directed on the chemical label when spraying. • Long pants and sleeves, chemical resistant gloves, and eye protection are strongly recommended. Additional protective gear may be required. Review the Operation –...
  • Page 26: Step Four: Clean Sprayer And Decontaminate After Use

    Operation – Using the Sprayer (continued) Step 4: Clean sprayer and decontaminate after use. When done using the sprayer, it is important to clean the sprayer and decontaminate yourself. Do not store the sprayer with chemicals in the tank, as it is unsafe and could also result in damage to the equipment. WARNING •...
  • Page 27: Storage

    Storage When not in use, store the sprayer indoors. For long term or winter storage, prepare the sprayer by running RV antifreeze (DO NOT USE automotive antifreeze) through the system. This will keep internal parts lubricated, protect against corrosion, and keep the unit from freezing. CAUTION •...
  • Page 28: Troubleshooting

    Troubleshooting WARNING Before troubleshooting or attempting to service, read the following safety rules to avoid accidental exposure to chemical and also risk of electric shock. Note: A reserve, clean container capable of holding at least 5 gallons should be kept for use when the sprayer tank needs to be emptied temporarily for repairs.
  • Page 29: Specifications

    The manufacturer reserves the right to make improvements in design and/or changes in specifications at any time without incurring any obligation to install them on units previously sold. Any Questions, Comments, Problems or Parts Orders Call Ironton Product Support 1-877-234-6869...
  • Page 30: Parts Breakdown - Exploded View

    Exploded View – Rev A Ref# Part# Description 777493 Wire Harness w/ remote switch 802177 Ironton 1 GPM disinfecting pump 82700 M5 x 15mm screw 30746 3/8" hose clamp 791073 Inlet Hose, 60mm 784519 Tube seal 798993 Suction tube 780544...
  • Page 31: Limited Warranty

    Any misuse, abuse, alteration or improper installation or operations will void warranty. Determining whether a part is to be replaced or repaired is the sole decision of Ironton.
  • Page 32 Northern Tool + Equipment Co., Inc. Burnsville, MN 55306 www.northerntool.com Made in China...

Table of Contents