Page 1
ColorIR™ EVK Camera – Quick Start Manual Overview Unispectral ColorIR EVK is a stand-alone multispectral camera for the NIR range. It is offered to customers for both performance evaluation and applications development. The EVK can be used for the capturing of ...
Page 2
3. Press on the ON/OFF power button (2). 4. When the camera is ON, the status LED turns orange. Power OFF Press and hold on the ON/OFF power button (2) for 2 seconds then release. 2. Status LED will turn to red and then the camera will shut down. Toggle screens ...
Page 3
LED light control Press the L ED button on the left sidebar to open LED menu. 2. You can turn on one or two LEDs by pressing the required CWL. Note: The LEDs are automatically turned off after saving the image.
Page 4
Demo suggestions Demo 1 – LEDs spectrum profile: Demonstrating the spectrum profile of the 4 LEDs. Scene setup: white/grey target with a specific LED light: 7 30, 810, 850, or 940 . Adjust the exposure time by using the camera's radiometric calibrated exposure scheme: a.