Related Manuals for Spray Master Technologies POWER CLEAN C Series
Summary of Contents for Spray Master Technologies POWER CLEAN C Series
- Page 1 IMPORTANT DOCUMENT - DO NOT DISCARD POWER CLEAN CENTRAL SYSTEMS 2.0 C / 5.0 C / INTERNATIONAL C SERIES OWNER ’ S MANUAL MANUFACTURED DATE SHIPPED SERIAL NUMBER FOR COMMERCIAL USE ONLY w w w.spraymaster tech.com...
-
Page 2: Limited Warranty
Spray Master Technologies® LIMITED WARRANTY Effective May 20, 2020 Spray Master Technologies will repair or replace any originally installed parts on the Power Clean series which are found Congratulations! to be defective in material or workmanship for a period of... -
Page 3: Table Of Contents
POWER CLEAN CENTR AL SYSTEM SERIES OWNER’S MANUAL TABLE OF CONTENTS LIMITED WARRANTY >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> OWNER / USER RESPONSIBILITY >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> FIRST STEPS >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Receiving Your Pressure Washer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Returning Your Pressure Washer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Pressure Washer Utility Requirements >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> What To Do For Service >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>... -
Page 4: First Steps
File a claim with the carrier within ten Service Department to discuss your return request. (10) days. Spray Master Technologies is not responsible Please note that all items returned must be F.O.B. for damage to the equipment caused by the freight Rogers, Arkansas. -
Page 5: Important Safety Warning Instructions
POWER CLEAN CENTR AL SYSTEM SERIES OWNER’S MANUAL IMPORTANT SAFETY WARNING INSTRUCTIONS THIS IS THE SAFETY ALERT SYMBOL. THIS SYMBOL ALERTS YOU TO POTENTIAL HAZARDS THAT CAN KILL YOU OR HURT YOU AND OTHERS. ALL SAFETY MESSAGES WILL FOLLOW THE SAFETY ALERT SYMBOL AND THE WORD “DANGER”, READ OPERATOR’S MANUAL “WARNING”, OR “CAUTION”. - Page 6 POWER CLEAN CENTR AL SYSTEM SERIES OWNER’S MANUAL IMPORTANT SAFETY WARNING INSTRUCTIONS (Continued...) PROTECTIVE EYE WEAR AND CLOTHING MUST BE WORN. KEEP WATER SPRAY AWAY FROM High pressure spray can cause paint chips or other ELECTICAL WIRING. particles to become airborne and fly at high speeds. To avoid personal injury, eye, hand, and foot protection Keep wand, hose, and water spray away from must be worn when using this equipment.
-
Page 7: Ground Fault Circuit Interrupter (Gfci) Protection
GROUNDING This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product must be attached SOME DETERGENTS MAY BE HARMFUL IF to an electrical supply of appropriate voltage and INHALED OR INGESTED. -
Page 8: Operating The Pressure Washer
POWER CLEAN CENTR AL SYSTEM SERIES OWNER’S MANUAL OPERATING THE PRESSURE WASHER USER OPERATED CONTROLS Master OFF/ON Switch: The power switch for Spray Electronic Chemical Metering: This unit comes with Master Central Systems should remain in the “ON” position two electronic chemical injectors. These are located to the left of the pump and motor assembly on the main at all times, unless being serviced. -
Page 9: Pre-Operation Check
PRE-OPERATION CHECK » Perform the pre-operation daily maintenance check » Attach high-pressure hose to discharge nipple prior to operating the unit to ensure safe operation with quick coupler. Lock quick coupler in place and prolonged equipment life. by pulling back coupler collar and inserting it into the discharge nipple then pulling back on »... -
Page 10: Operation
» Disconnect and store all equipment. ACCESSORIES The accessories listed below are available for use with your Spray Master Technologies high-pressure cleaning system. Hummer Jet™ Jr. – Indoor floor surface cleaner. » Focuses high-pressure spray in centralized area for thorough cleaning. Reduces misting and overspray. -
Page 11: Maintenance
POWER CLEAN CENTR AL SYSTEM SERIES OWNER’S MANUAL MAINTENANCE GENERAL MAINTENANCE MOVING & STORAGE Oil: Add oil to the pump reservoir as needed to keep the oil Moving: Spray Master Central System series units are level at the center of the oil-level sight glass between the stationary units that are installed to walls or racks. -
Page 12: Chemical Metering
POWER CLEAN CENTR AL SYSTEM SERIES OWNER’S MANUAL CHEMICAL METERING CHEMICAL MANUFACTURERS RECOMMENDED OUNCES PER GALLON ( OZ/GAL. ) OTHER DILUTIONS USE 143 / (Oz per Gal.) PUMP 115 / (Oz per Gal.) FLOW 100 / (Oz per Gal.) (GPM) 83 / (Oz per Gal.) Time in Seconds to Draw Five (5) Ounces of Chemical CHEMICAL METERING...
Need help?
Do you have a question about the POWER CLEAN C Series and is the answer not in the manual?
Questions and answers