Advertisement
- Batteries must be inserted with the correct polarity;
- Exhausted batteries are to be removed from the product;
- The supply terminals are not to be short-circuited;
- Di erent types of batteries or new and used batteries are not to be mixed;
- Only batteries of the same or equivalent type as recommended are to be used.
- For longer battery life, it is recommend to use alkaline batteries.
- If the unit is not to be used for a prolonged period, such as a month of longer, remove the batteries to prevent
possible leakage.
Battery installation:
DR301 Battery
1. Use a Philips screwdriver to unscrew the battery compartment
replacement.
cover located on the base of the unit.
2. Insert 4 x 1.5V, AA new batteries, ensuring the correct polarity
SIZE AA 1.5VX4
as indicated on the sketch.
3. Replace the cover and tighten the screws.
Operating Instructions:
+
Enjoy the K9 with your Bluetooth® enabled smartphone.
1) To work with this product, please download our FREE
TM
SM
application using the Google Play
store app or App Store
+
with searching the keywords "DR301"
SEARCH "DR301"
2) Press and hold the On/O button for 2 seconds
3) The device will be in the Mode 1.
4) Press once again will enter Mode 2.
5) Press once again will go back to Mode 1 and so on.
Press and hold On/O Button for 2 seconds will turn o the K9.
Note : To save power, please turn o the unit if not in use.
Mode 1 : Remote Control by smartphone
The K9 should be connected with your Bluetooth® device. Once it is connected, the eye
(RED LED) will light up and stop ashing. Now you can drive the K9 via our app.
For more detail of the app operation, please read the "SUPPORT" page in the app.
Note : Under mode 1, K9 will turn o if not in use for 3 minutes.
Mode 2 : Static Speaker
The keypad (RGB LED) will ash at 0.5Hz.
The K9 should be connected with your Bluetooth® device. In this mode, the unit cannot be
controlled by the apps and used as a speaker.
Note : Under Mode 2, you have to turn o the unit by pressing the On/OFF button for 2 seconds.
How to pair up Bluetooth® device
1. Place the Bluetooth® device within 1 meter and power on the K9
2. Red eye light is ashing.
3. Perform the pairing procedure on your smartphone to detect the K9.
When the list of detected devices appears on the display of the Bluetooth® device,
select "K9"
4. Build "K9" Bluetooth® connection from your smartphone. When the connection is made, the
eye (red indicator) lights up.
Page 2
Advertisement
