Table of Contents
Advertisement
[5] SMA female connector. It used to connect the receiver's antenna.
Product Installation Instructions
一、 Transmitter Installation Steps
1.The transmitter antenna should be mounted to the antenna connector, tighten in place and adjusted the antenna tilt to the right
direction;
2.Using a HDMI cable,one side is to connect the transmitter, and the other side is to connect the video source. Meanwhile make
sure the video source is on power;
3.Connect to DC15~36V power supply, and the transmitter starts to send the signal after finishing the initialization;
二、 Receiver Installation Steps
1、 The installation of the receiver antenna to antenna connector and tighten in place and adjust the antenna tilt to the
right direction;
2、 Using a HDMI cable, one side is to connect the receiver, and the other side is to connect to a HDMI input port of high-
definition display ;
3、 Connect DC 15~36V power supply. After the receiver initialization completes, you can receive the wireless signal from the
transmitter and output the video.
4
Advertisement
Table of Contents
