BD Sensors PMC 110 Mounting Instructions

DE EN
Montageanleitung /
Mounting instructions
Pressure Transmitter
Screw-in Transmitter
OEM Pressure Transmitter
, , , , ,
, , , , ,
, , , , ,
, , , , ,
,
, , , ,
VOR GEBRAUCH SORGFÄLTIG LESEN
AUFBEWAHREN FÜR SPÄTERES NACHSCHLAGEN
READ THOROUGHLY BEFORE USING THE DEVICE
KEEP FOR FUTURE REFERENCE
These mounting instructions are an excerpt from the complete
operating manual. It may be downloaded from our homepage,
if you are not familiar with the device.
http://www.bdsensors.de
– Technical modifications reserved –
English
WARNING
WARNING
Limitation of liability and warranty
Intended use
Product identification
Wiring diagrams
A/V
NOTE
Pin configuration
optionally with communication interface RS232 for
/ / /
NOTE
Code M10 / M20 M13
NOTE
Mounting
Danger of death from airborne parts, leaking fluid, electric shock
Danger of death from improper installation
DANGER
Danger of death from explosion in oxygen applications when used improperly
NOTE 3-A symbol
NOTE
NOTE
NOTE
connection according to DIN 3852 connection according to EN 837
dairy pipe connection Clamp- und Varivent connections
G1" cone
WARNUNG
C10 CB0
UL marking
NPT connections
NOTE
flange connections
internal threads M20x1.5 and 9/16" UNF (for
Danger of injury due to wrong installation
1/4" flare
)