Page 2
Tap Add Gateway. Your mobile After you have created or logged in to your device will form a temporary SensorPush account, choose a WiFi network to use connection to the Gateway. with your Gateway and enter your WiFi password. It may take a minute or two.
Page 3
This means that the Gateway has not communicated with the section and/or contact us directly at support@sensorpush.com SensorPush cloud for an hour or more. A couple of things to and a member of the engineering team will get you back to you consider are: ASAP.
Page 4
Gateway will not be usable. (e.g. same room). Once finished, the Gateway is removed from the app 2) Go to app settings inside the SensorPush app and verify and it can be used with a different account. that you are logged in. Here’s how: •...
Page 5
CHECKING THE DATA When you open the app, the app checks in You can also force the SensorPush app to check the cloud. with the SensorPush cloud to fetch updated To do this try a pull-down refresh (a.k.a. “swipe-down-to- data.
Page 6
RENAMING GATEWAY is automatically switched off for improved battery life. You can To change the name of the Gateway, open the SensorPush app turn it back on at any time through the settings section inside to the main “Devices” screen. Scroll to the Gateways section the SensorPush app.
Page 7
ADVANCED NETWORKING PRODUCT SPECIFICATIONS With WiFi, you’ll be able to use WPA/WPA2, WEP, or open The most up-to-date specifications for each SensorPush sensor networks. Web-based WiFi authentication (like you often see in and Gateway model are detailed in the product a hotel, for instance) is not supported.
Need help?
Do you have a question about the G1 and is the answer not in the manual?
Questions and answers