Power On / Off Light Control Low Water Protection: Auto Shut-off the Humidi er CLEANING AND MAINTENANCE Caution Daily Maintenance Weekly Maintenance Scale Removal Instructions Disinfecting Instructions Clean the Dustproof Sponge End-Of-Season Care and Storage TROUBLESHOOTING GUIDE 13/15 WARRANTY HOMECH CUSTOMER CARE...
BEFORE USING THE HUMIDIFIER STATEMENT Thank you for purchasing a Homech product that has been tested to meet our stringent quality standards. This product is covered with Homech product and labor warranty for 12 months from the date of its original purchase.
WHEN USING THE HUMIDIFIER AFTER USING THE HUMIDIFIER 1. DO NOT plug the unit with wet hands. 1. Always disconnect from a power source by pulling out the plug when not in use. 2. Humidi er requires regular cleaning. Please refer to, and follow the Cleaning and 2.
PACKAGE CONTENTS · 1 x Homech Humidi er (Model: HM-AH003) · 1 x Cleaning Brush · 1 x Dustproof Sponge · 1 x Thank You Card · 1 x User Manual SPECIFICATIONS HM-AH003 Model Operating Voltage AC 100-120V 50 / 60Hz...
OPERATIONS AND FUNCTIONS Power On / Off and Mist Adjustment Add Water Plug the power cord into a wall socket. Now the humidi er is ready for use. 1. Remove the nozzle and turn the water tank upside down. 1. Rotate the control knob clockwise to the ON position. The blue LED indicator will light up 2.
Scale Removal Instructions CLEANING AND MAINTENANCE Caution 1. DO NOT submerge the base in water. 2. Make sure water does not enter the base through the air outlet, air inlet, or the control knob and light button. 3. DO NOT wash any part of this humidi er in dish washer which will damage the humidi er and void the warranty.
Clean the Dustproof Sponge 1. Turn off and unplug the humidi er. Remove the nozzle. 2. Remove the water tank from the base. Remove the tank cap. Make sure that the white sealing ring does not come off. Drain water from the water tank and base. Remove any accessories and set them aside.
TROUBLESHOOTING GUIDE Not enough water inside the Re ll and reinstall the water tank. tank. Mist level is set too low. Adjust to larger mist output. 1. If the information listed in the troubleshooting guide can’t solve your problem, please email us for help.
1-1. Adjust to maximum mist output. 1-2. Close door or windows to Mist level is set too low for the This product is covered with Homech product and labor warranty for 12 months from the date reduce air ventilation, or room size.
Page 12
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the HM-AH003 and is the answer not in the manual?
Questions and answers