Flair Espresso The Royal Quick Start Manual

What's Included in Your Royal Grinder
The Royal grinder consists of three major sections: (A) a detachable
aluminium handle, (B) a precision-milled aluminum body, (C) and a
detachable stainless steel catch cup.
Thumb Rest
Handle Screw
Aluminum
Body (B)
Detachable
Handle (A)
Ergonomic
Pommel
Maximum Dose: 30 grams
Minimum Grind Adjustment: .02mm
1. Lift crown up until you
Anti-Popcorning
Cap
"feel" a click and it is fully
disengaged from the base.
Adjustment Crown
Thrust Bearing
2. Turn crown to adjust
Guide Bearing
grind size.
Full Wrap
+
Clockwise (increasing
Silicone Grip
numbers) increases
Stainless Steel
grind size.
Shaft
Guide Bearing
- Counter - Clockwise
(decreasing numbers)
Conical Burr Set
Decreases grind size.
Detachable Catch
3. Lock grind adjustment
Cup with Stainless
by pushing crown down
Steel Liner (C)
until it clicks into base.
Adjusting Your Grind
Lift, Turn & Lock Adjustment Crown
Dialing-In Your Grind
Three full rotations & 72 individual adjustments
Your Royal grinder has 72 adjustments across three rotations of the
adjustment crown: or 24 micro-settings per rotation. You will receive
your grinder set to ZERO. Your grinder will lock up to the right of zero
(rotating your adjustment crown counter-clockwise). Note: Never try
to force adjustment crown below Lock Up position. The lock
up position may decrease over time as your grinder seasons.
French Press
Aeropress
(coarse)
(med. fine)
3rd Rotation
2nd Rotation
1st Rotation
Flair 58 &
Commercial Espresso
(extra fine)
NOTE: Grind settings will vary based on brew method, desired
dose, bean type and roast. Dial-in to your preferences.
Non-58 Flair Models
(fine)
Pour Over
(med. coarse)
ZERO
Finest Suggested Grind