Rugged Radios SS-WM1 User Manual

1. PLAY / PAUSE / PHONE plays or pauses music; answers or ends phone calls.
2. LED green indicates power is on, red indicates transmitting.
3. BLUETOOTH pairing mode active when SS-WM1 is powered on.
4. AUDIO OUT for recording audio; e.g. a GoPro.
5. ON / OFF SS-WM1 power switch.

Bluetooth Pairing for Music and Cell

Start with the intercom powered off and the bluetooth function of your phone or device powered off.
1. Turn on the SS-WM1.
2. Turn on the phone or device's bluetooth.
3. Wait for "SS-WM1" to be displayed on the device.
4. Select "SS-WM1" and wait for the device to pair.
5. If pairing is not successful, restart the process.
Pro Tips:
- Audio volume is controlled by the paired device.
- Some devices may need to enter pairing mode; e.g. pair new device, pair +, etc.

2-Way Radio Use

Received audio is controlled by your radio's volume control, not the intercom volume control. The
Push-To-Talk (PTT) Button is used for transmitting over a 2-way radio connected to your intercom. To
transmit, press and hold the PTT button, speak, and release when finished.
Pro Tips:
- When transmitting, the LED on both the intercom and radio should illuminate red.
- Music (Bluetooth) volume will dim down when transmitting and receiving.
Rugged Radios
SS-WM1
USER MANUAL
1 2
| www.ruggedradios.com
3 4 5
| 888-541-7223