Urban SK TREKKING On behalf of the entire Skateflash team we want to thank you for the purchase of your new E-bike TREKKING and we hope you enjoy it. Skateflash is a leading company in personal mobility and leisure. We are a concerned entity, respectful with the environment and all our vehicles are emission free.
2.- Contents of the purchased product · Before using your E-bike for the first time, check the content of the package. If any of the items is not included, contact your purchasing dealer. 1x E-bike SK TREKKING 1x User Manual 1x Power supply 1x Toolkit 1x Backpack...
Page 6
10.- This product is restricted to one person. It’s prohibited to drive it with two or more people. 11.- Pregnant women should not ride the E-bike. 12.- Check the E-bike before each use. In case of finding anoma- lies, contact technical service. 13.- Before driving the E-bike, you must know its operation very well and then use it in complete safety.
Page 8
DISPLAY Battery indicator 1.- Keys and operating instructions. a) Insert the key into the battery and turn it to the ON position to turn on the E-bike. b) Press the ON / OFF button on the display to turn on the E-bike. c) Pedal to start driving or press the help button on the display (6km).
5.- Startup Before using the E-bike for the first time it is necessary to: - Check tire pressure - Adjust the height of the handlebar - Saddle tightening and adjustment - Check the folding system - Check looseness and loose screws - Check braking system - Make a full charge of the battery * REMEMBER:...
6.- Product assembly At Skateflash we make it easy for you. With just a few assembly steps you can drive your E-bike. Install the front wheel on the fork and lock it with closing. Attention! Make sure that the closure is secure. Install the light and the front fender on the fork crown.
Page 11
Place the handlebar on the stem and tighten the bolts. Adjust the angle of the stem and tighten it. Attention! Make sure the screws are secure. Insert the seat post, adjust height and tighten the clamp. Attention! Make sure the clasp is secure.
7.- Safe driving Driving notes 1. Always use suitable protective equipment (helmet, gloves, elbow pads, etc ...). 2. See the "Startup" section of the product. 3. Make sure that each security lock is on its place. 4. Turn the key to the ON position to connect the Ebike.
Page 13
Periodic maintenance It can be done by the user himself. It consists of reviewing the “daily maintenance” section and also paying attention to the tension of all the visible screws on the equipment, pieces and folding system. It will be done depending on its use. In case of daily use, it is recommended to carry out periodic maintenance every 15 days (in case of moderate use, apply maintenance once a month).
Page 14
3)Charge the battery Remove the battery and connect the charger plug in the slot as shown in the image. Battery power The number of fractions shows the amount of battery power remaining. Don't expect it to completely sell out. It is recom- mended to charge the battery when 2 fractions remain.
9.- Features 1.- Features and benefits of the Sk TREKKING. 25 km/h** 250 W 30-35 km* Tire size: 700C x 45C, alloy wheels, double wall. Speed: 25 km/h ** Charging time: 5 - 6 h Power: Rear motor 250 W Charger: Smart with UL certification.
10.- Frequent questions Skateflash offers answers to a selection of the most frequent questions asked by the users: 1.- The E-bike does not start a) Confirm that the battery is charged b) Verify that the display connectors have not come loose 2.- The E-bike has no power a) Check the speed number (1-2-3) b) Check the battery charge level...
Can’t find the solution? Scan the QR code and contact: - TECHNICAL SERVICE - CUSTOMER SUPPORT 11.- Trademark statement Skateflash is a registered trademark and marketed by QD Global International. No part of this manual may be duplicated, modified, copied, sold or distributed without the written consent of QD Global International.
13.- Customer Service and warranty Skateflash offers a complete range of services and official technical assistance (TAS) to keep your scooter in perfect working order. Enjoy your scooter every day and without setbacks. With the purchase of your scooter, check all the startup and installation points (recommended to be carried out by a specia- list).
Skateflash has the necessary spare parts for the entire range of products. You can buy them through the web www.skateflash.se or by checking availability by writing directly to the mail info@skateflash.se 15.- Purchase and warranty activation Skateflash offers a warranty that must be activated at the time of purchase of the product, following the steps: 1.- Scan the QR visible on the product.
Need help?
Do you have a question about the URBAN SK TREKKING and is the answer not in the manual?
Questions and answers