How To Clean - Hamilton Beach HBMIS4515 Owner's Manual

1. Ensure the unit is unplugged before starting door reversal.
2. Remove the 2 plug buttons on the left side on top of the cabinet.
3. Remove the plastic hinge cover by prying from the back and pulling forward.
4. Remove the 2 screws from the top hinge.
5. Lift the cooler door up and off the center hinge (right side). Set the cooler door on
a nonscratching surface with the outside up.
6. Open the freezer door and remove the center hinge by removing the 2 screws.
Lift the hinge to remove.
7. Lift the freezer door off of the bottom hinge. Set the
freezer door on a non-scratching surface with the
outside up.
8. Lay the refrigerator on its back to access the bottom hinge.
9. Remove the bottom hinge by removing the 3 screws. Lift the
hinge to remove.
10. Remove the hinge pin on the bottom hinge and
reinstall on the opposite side of the hinge.
IMPORTANT: Do not clean your unit with flammable fluids. The fumes can create a
fire hazard or explosion.
WARNING: Before maintenance or clean to the unit, be sure to unplug the unit first.
Prohibit to pour down the water or let the whole unit submerge in the water, it will wet
the inside electrical parts.
Cleaners: Never use harsh, abrasive cleaners, heavy-duty cleaners, or solvents on
any surface.
Exterior: Wipe with damp, sudsy cloth, rinse and dry. For stubborn stains and for
periodic waxing, use silicon wax.
Refrigeration Section: Wash shelves and other removable parts in warm sudsy water,
rinse and dry. Wash interior with baking soda solution (3 tablespoons to I liter of water)
or warm sudsy water, rinse and dry.
Magnetic Door Seals: Wash with warm sudsy water.

How To Clean

10
4