Table of Contents
Advertisement
ADDRESS ROTATION FUNCTION
4-7-2
T h i s function rotates ( r e p e a t s ) addresses w i t h i n the i n t e r v a l determined by
the s e t BIGIN address and the END a d d r e s s .
according to address order and r e c a l l by t h i s order, so when the set address
(END) i s reached, the funct ion automat i c a l l y r e t u r n s to the f i r s t
(BIGIN).
Example : S e t the r o t a t ion f u n c t ion to work i n the i n t e r v a l between
address 1 and address 15.
1)
Input ( s t o r e ) the n e c e s s a r y s e t informat ion i n addresses
from address 1 to address 15.
2)
Return to address 1.
3)
Press the 2nd F key © .
4)
When the RTN/BIGIN key ©
flashes momentarily to indicate that address 1 has been set as
the BIGIN address.
5)
Set the address to 15.
6)
Press the 2nd F key (§).
7)
When the RCL/END key ©
flashes momentarily
as the END address.
8)
To r e t u r n to the BIGIN address during c o n s e c u t i v e address
increment, press the RCL key © .
* I f you want to s e t the address independent ly of the BIGIN and END
addresses, enter the f igure by using the direct sett ing method.
* When the address rotat ion funct ion i s not used, set the BIGIN address to
00 and the end address to 99.
* When you want to change the address r o t a t ion range, i t i s not possible
to set the BIGIN address higher than the set END address value.
i s i t possible to set the END address lower than the set BIGIN address.
In these cases, use the following procedure.
Input the s e t informat ion
i s pressed, the address d i s p l a y
i s p r e s s e d , the address d i s p l a y
to indicate that address 15 has been set
address
Neither
31
Advertisement
Table of Contents
