Parts Identifier; Assembling Your Scooter; Part Description - Carromco ACTION RIDER 100 Instructions Manual

78191, 78191CS

PARTS IDENTIFIER

ASSEMBLING YOUR SCOOTER

Use the Allen key provided to tighten the bolt by turning it clockwise. To loosen the bolt, turn it anti-clockwise.
Loosen the clamp on the steering tube. Slide the tube onto the fork until it is touching the fork headset washers.
Tighten the clamp as shown using Allen key.
NO.

PART DESCRIPTION

1 GRIP
2 HANDLEBAR
3 STEERING TUBE
4 ALLOY CLAMP
5 HEAD TUBE
6 FRONT FORK
7 FRONT WHEEL
8 DECK
9 FLEX BRAKE
10 REAR WHEEL
11 REAR AXLE
ATTENTION
Before tightening ensure the front wheel is
facing forward and straight ahead, handlebars
are square to the front wheel and the Y bar
in facing forward. Tighten securely. Loosen
the clamp on the steering tube. Slide the
tube onto the fork until it is touching the fork
headset washers. Tighten the clamp as shown
using Allen Key.
-2-
ENGLISH
QTY
2
1
1
1
1
1
1
1
1
1
1