Summary of Contents for ATEMPOWER PSI3000-BLK-UD-AP
- Page 1 3000W DC-AC PURE SINE WAVE INVERTER USER MANUAL PLEASE READ AND UNDERSTAND THIS MANUAL THOROUGHLY BEFORE OPERATION...
-
Page 2: Product Applications
Thank you for purchasing our Pure Sine Wave Inverter This pure sine wave inverter with durable aluminium housing is compact and well designed and represents the new trend of high-frequency techonologies. It incorporates the latest IGBT inverter technology for a remarkable 90% high efficiency rate and offers continuous power of 3,000W and 6,000W maximum. -
Page 3: Package List
1 PC(s) 25mm² Black Cable 1 PC(s) 25mm² Red Cable 8 PC(s) 30A Blade Fuses 1 PC(s) User Manual TECHNICAL SPECIFICATIONS Model: PSI3000-BLK-UD-AP 14.57"L (37cm) x 8.07"W (20.5cm) x 3.35"H (8.5cm) Product Dimension Gross Weight 11.46pounds (5.2kg) 3,000W Continuous Power... -
Page 4: Warning And Safety Information
WARNING & SAFETY INFORMATION Shock hazard. Keep it away from children The inverter generates the same potentially lethal AC power as a normal household wall outlet. Treat it with the same respect. Do not insert foreign objects into the inverter's AC outlet, fan or vent openings. Do not expose the inverter to water, rain, snow or spray. -
Page 5: Installation
INSTALLATION For safe and optimum performance, please install the inverter in a location that is: Dry- Do not expose it to water drips or spray. Cool- Operate it only in ambient temperatures between 32F(0°C) and 104F (40°C ). Keep it away from heating vents or other heat producing equipment. -
Page 6: Operating The Inverter
OPERATING THE INVERTER Connect the 12VDC battery to the inverter. Connect your AC devices to the AC outlet or USB port on the front panel of the inverter. The green indicator illuminates when the inverter is switched on, which shows the device is functioning properly. Please switch off the inverter and disconnect the battery when you are not using. -
Page 7: Built-In Protection
BUILT-IN PROTECTION As the battery capacity is used up, battery voltage begins to drop. When the inverter senses that the voltage at its DC input has dropped to 10.5V, the audible alarm will sound and the red FAULT light will be flashing. Low Voltage Shutdown When the battery voltage drops to 9.5V, the audible alarm will sound and the red FAULT light will be flashing, at the same time, the inverter will... - Page 8 PROBLEM: Inverter does not provide full 3,000W power, just run AC devices with small loads. Possible Cause Suggested Solution Shorten cables or use heavier cables. Voltage drop across DC cables Check if your battery is fully charged or not. PROBLEM: Battery run time is less than expected. Possible Cause Suggested Solution Power consumption of...
-
Page 9: Fuse Replacement
FUSE REPLACEMENT 1.Turn the inverter upside down and disconnect the battery from the inverter. 2.Discharge the inverter capacitors by short-circuiting the negative and positive poles of the inverter and then pushing the power switch in the “I” position. 3.Remove all four screws on the AC end panel and push the power switch in the “O” position(see Figure 1.). Slide out the bottom plate to the direction of the AC end panel(see Figure 1.). -
Page 10: Warranty
WARRANTY MONTH WARRANTY PERIOD: Full 12 months warranty from date of purchase against all manufacturing defects. This DC-AC Pure Sine Wave Inverter by ATEM POWER comes with guarantees that cannot be excluded under the Australian Consumer Law. WHAT DOES THE WARRANTY COVER? Under normal usage conditions, this warranty covers: 1.Any defect in design or manufacture which results in its failure to perform correctly as described.
Need help?
Do you have a question about the PSI3000-BLK-UD-AP and is the answer not in the manual?
Questions and answers