Advertisement
How to Change the Inline Cartridge:
HOW TO DISCONNECT
HOW TO CONNECT
At least 3/5" in
Lock
Installation Notes:
Please note the direction of water flow indicated on the product.
Always flush a new cartridge for 5 minutes before use and check for leaks.
If leaks do occur, check the 1/4-inch tube is correctly inserted all the way into the
quick-connectors.
We recommend replacing the inline cartridge after 12-months if used as a polisher
cartridge in an under-sink RO water system or every 2000 gallons, 6-months or
when the flow rate becomes too slow when using the inline filter on its own.
R
MODEL: T33-F10-QC
FUNCATION
odor and significantly improving the water
taste.
Membrane Solutions T33 post carbon filter
designed for use on any point of use drinking
water appliance including reverse osmosis
(RO) systems, distillation systems, coffee and
espresso brewers, food service equipment,
ice machines, misters, bottle less water
coolers, water fountains, refrigerators and
other water dispensing devices, helping to
produce cleaner, fresher tasting water.
: Effective at removing
Advertisement
Table of Contents
Related Manuals for Membrane Solutions T33-F10-QC
Summary of Contents for Membrane Solutions T33-F10-QC
- Page 1 FUNCATION : Effective at removing odor and significantly improving the water taste. Membrane Solutions T33 post carbon filter designed for use on any point of use drinking water appliance including reverse osmosis (RO) systems, distillation systems, coffee and espresso brewers, food service equipment,...
- Page 2 FILTER CARTRIDGE REPLACEMENT (1) Remove safety clip. (2) Push the collet in and hold the filter. (3) Pull the filter tube straight out and discard old filter. [NOTE] Prepare towel and bowl under the filter as water might spill out. (4) Cut the both ends of the water tube flat with tools.
Need help?
Do you have a question about the T33-F10-QC and is the answer not in the manual?
Questions and answers
No flow direction indicated. One end smooth other has a design
The flow direction for the Membrane Solutions T33-F10-QC filter is indicated on the product. Ensure to follow the marked direction when installing the filter.
This answer is automatically generated
Found flow direction