Table of Contents
Advertisement
DV-L88S/S(H)
DV-L88W/W(A)
Adjustment Item
Adjustment Menu
1Gamma setting
check
2Contrast check
3RGB amplitude
adjustment
4Gamma 0 set
value change
5Sub-bright
adjustment
6Common
amplitude
adjustment
7Contrast
adjustment
8White balance
adjustment
(Red)
9White balance
adjustment
(Blue)
0Burst clear
adjustment
Adjustment Point
CONT
GAIN
Connect the synchroscope Black-and-white Adjust the Vpp(SYNC-SYNC) of VG to
to 2PIN (VG) of TP1900.
GAM0
SBRIGHT
Connect the synchroscope Black-and-white Adjust the 10% white part(SYNC-white 10%) to
to 2PIN (VG) of TP1900.
GPOS
Connect the synchroscope Black-and-white Adjust the common amplitude to 8.0±0.1V.
to 1PIN (COM) of TP1900. 10STEP
CONT
Connect the synchroscope Black-and-white Adjust the 100% white part(SYNC-white100%)
to 2PIN (VG) of TP1900.
WB-R(Red)
Connect the synchroscope Black-and-white Adjust the white balance (red) so that black level
to 2PIN (VG) and 3PIN
(VR) of TP1900.
WB-B(Blue)
Connect the synchroscope Black-and-white Adjust the white balance (blue) so that black level
to 2PIN (VG) and 4PIN
(VB) of TP1900.
STINT
Connect the synchroscope MOD10STEP
to 4PIN (VB) of TP1900.
Signal/Setting
Check that the gamma function of the body is
on "level 2".
Check that CONT set value is "AB".
10STEP
4.0±0.1V.
4.0V±0.1
The set value of GAM0 is changed from "50" to
"56".
10STEP
1.0±0.05V.
1.0V±0.05
8.0V±0.1
10STEP
to 3.8±0.1V.
3.8V±0.1
10STEP
the equal of green and red output become equal.
*Adjust the 30% white.
10STEP
the equal of green and blue output become
equal.
*Adjust the 30% white.
Adjusted so that the side muscle of the colour
signal may become the smallest with seeing
liquid crystal image plane.
[Another method] [Another method]
100% colour bar Adjusted so that every horizontal term space
may become the level which the swing level of
yellow of the colour bar signal is the same as.
12
Adjustment Contents
Input
G
Advertisement
Table of Contents
