Panasonic PVQ-V200 Service Manual page 8
Hide thumbs
Also See for PVQ-V200:
- User manual (36 pages) ,
- Operating instructions manual (36 pages) ,
- Service manual (2 pages)
Advertisement
After replacing the Cylinder Unit, press COUNTER RESET button
on remote in this mode. Only Total lapsed time with Cylinder
rotation (hour) will be cleared to 0.
2. To release from Usage Screen Mode, press any operation button
on VCR in this mode. VCR will return to normal operation mode.
4.1.3. EEPROM IC (IC6005), MAIN C.B.A. REPLACEMENT NOTE
After replacing EEPROM IC (IC6005) or Main C.B.A., be sure to perform the
ADJUSTMENT" in ELECTRICAL ADJUSTMENT procedures.
4.1.4. SERVICE POSITION
4.1.4.1. Service Position
CAUTION:
HOT CIRCUIT (Primary circuit) exists on the Main C.B.A.
Use extreme care to prevent accidental shock when servicing.
4.1.4.1.1. Service Position (1)
4.1.4.1.2. Service Position (2)
Fig. 2-1
Fig. 2-2
"PG SHIFTER
Advertisement
