Advertisement
Quick Links
M G a
ax
Product Accessories
426 mm
35 mm
Product Description
Product Name:
Size:
Quantity:
Material:
e r
Adjustable Dual Monitor Stand (Black)
Adjustable Dual Monitor Stand (Black)
33.8 x 11.9 x 5.2 inches
1 Pack
High Impact Polystyrene
304 mm
1
X8
A
B
42 mm
X8
C
D
23 mm
X4
E
222 mm
maxgearuservice@outlook.com
X24
28 mm
17 mm
X1
28 mm
17 mm
33 mm
Advertisement
Summary of Contents for Maxgear B1050
- Page 1 M G a Adjustable Dual Monitor Stand (Black) Product Accessories 28 mm 304 mm 426 mm 17 mm 42 mm 35 mm 28 mm 23 mm 17 mm 33 mm 222 mm Product Description Product Name: Adjustable Dual Monitor Stand (Black) Size: 33.8 x 11.9 x 5.2 inches Quantity:...
-
Page 2: Installation Steps
Installation Steps Install the accessories in the Insert the drawer partition into the corresponding position as shown in drawer. (Pay attention to align the figure. (The height of the product with the slot in the drawer) can be changed by adjusting the number of B modules) Mode A Install the products according to the instructions, and you can get... - Page 3 Mode B Replace two B modules with one D module. (The D module can be installed at the front or after side) 0° - 180° Adjust the angle according to your actual needs. (Angle range: 0°-180°)
- Page 4 Mode C （Pay attention to the green description text at the bottom of step 2） Insert the B module into the hole on the top of another monitor stand. Complete the installation, you can get the monitor stand with different heights. Attention: This installation method may cause a slight inclination on the higher side.
- Page 5 Mode D Install the D module on the after side of the dual monitor stand and rotate the stand on the both sides. Let the side with drawer facing the outside, you can get a monitor stand with larger area.
- Page 6 Mode E Install one of the stands above the other one. When finish installation, you can get a monitor stand with 2 drawers. (The height of the product can be changed by adjusting the number of B modules)
Need help?
Do you have a question about the B1050 and is the answer not in the manual?
Questions and answers