Advertisement
BEFORE THE FIRST USE
Before using this appliance for the first time, wash the bowl and blade assembly in
sudsy water and dry thoroughly, all of these parts are safe in dishwasher, wipe the
motor unit with a damp cloth, do not immerse the motor unit in water.
HOW TO CHOP OR MINCE FOOD
1. Place the bowl on a counter or other flat surface, then slide the blade down
over the shaft in the bowl. Be careful not to touch the blade as it is extremely
sharp.
2. Place food in the bowl, the desired food refers to the chopping guide.
3. Place the bowl cover onto the bowl then position the motor unit onto the bowl,
the embossment on the bowl cover is linked up to the hole on the motor unit,
lining up the motor unit locking tabs to the bowl locking slots till the motor unit
locks.
4. Pulg the power cord, the left hand hold the motor unit, then the right hand
depress and hold the pulse button to process.
Note: This product has a pulse button. Avoid running the motor continuously in
this mode for period over 30s. the longer the continuous pulse, the finer the
texture. For coarsely chopped foods, use short pulses.
5.
Be sure the blade stops rotating completely before removing the bowl cover.
Unplug the unit. Remove the motor unit and grasp the plastic blade hub.
carefully pull the blade assembly out. Remove the bowl and empty the
processed food. Do not use bowl for storing food.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the power outlet before cleaning.
Wash the bowl, blade assembly immediately after use either with warm/sudsy
water or in the dishwasher. Wipe off the motor unit with a damp cloth- do not
immerse in water.
NOTE: Do not use chemical, steel, wooden or abrasive cleaners to clean the unit
to prevent the gloss loss.
3
Advertisement
