Advertisement
Quick Links
Advertisement
Related Manuals for Namron PANELOVN 400W
Summary of Contents for Namron PANELOVN 400W
- Page 1 BRUKSANVISNING INSTRUCTION MANUAL 400W/600W/800W/1000W...
- Page 2 2) Attach the clips onto the wall. 800W 26cm 3) Push the heater into the clips and use screws to thighten the 1000W 26cm clips. Min.15cm Min.20cm 2.19cm min 2.19cm min Min.30cm Min.5cm Min.10cm Min.5cm Namron AS - Nedre Kalbakkvei 88B, N-1081 Oslo - NORWAY...
- Page 3 9.Press “TIMER” button after program setting, the heater will directly start the weekly program working mode (FIG.4), the clock symbol will appear on the display. NOTE:The time setting should be done before the program setting, so the heater can work under correct program period. Namron AS - Nedre Kalbakkvei 88B, N-1081 Oslo - NORWAY...
- Page 4 Ved bruk av skjøteledning må den vaere kortest mulig og være utstrakt nar during maintenance. If using an extension cord it must be as short as pos- ovnen er på. sible and be extended when the oven is on. Namron AS - Nedre Kalbakkvei 88B, N-1081 Oslo - NORWAY...
- Page 5 Contact details Namron AS - Nedre Kalbakkvei 88B, N-1081 Oslo - NORWAY...
- Page 6 Contact details Namron AS - Nedre Kalbakkvei 88B, N-1081 Oslo - NORWAY...
- Page 7 Contact details Namron AS - Nedre Kalbakkvei 88B, N-1081 Oslo - NORWAY...
- Page 8 Contact details Namron AS - Nedre Kalbakkvei 88B, N-1081 Oslo - NORWAY...
Need help?
Do you have a question about the PANELOVN 400W and is the answer not in the manual?
Questions and answers
panelovn 600w eter flere års bruk har ovnen plutselig stilt , seg på 11gr den har hele tiden vert brukt uten program, har fulgt bruksanv, men den lar seg ikke innstille på en annen temp, er ovnen defekt?
If the Namron PANELOVN 400W suddenly only heats to 11°C after years of use without programming, and the set temperature is higher, it may indicate a fault. The heater is designed to heat automatically when the environment is below the set temperature (which can be adjusted between 5°C and 35°C). If it is not reaching the desired temperature, possible causes include a sensor error, thermostat failure, or internal component degradation. Therefore, the heater may be defective.
This answer is automatically generated