Advertisement
Quick Links
Outdoor IP67
UltraBright™ Valor Premier Diffusion Series
Installation Guide
UL Listing and Compliance Information:
Our products are safe to use and free from any hazardous substances. They are UL Listed in the USA
and Canada. To comply with UL standards and inspections, please keep in mind that:
A Class 2 power supply is to be used with each run of lights.
Each installation of LED strip lights in series should consume no more than 100W max.
Español
Se debe utilizar un transformador de Clase 2 cuando es necesario ajustarse a las normas de seguridad UL.
La instalación no debe exceder un máximo de 100W cuando se conecta la tira LED en serie.
Français
Pour être conforme aux règles de sécurité, une source d'alimentation de Classe 2 doit être utilisée.
L'installation ne doit pas dépasser un total de 100W lorsque les bandes LED sont montées en série.
Tools Needed
Screwdriver
Scissors or Shears
* Tube of neutral-based silicone electronics grade sealant.
Pliers
Silicone Sealant*
Utility Knife
Advertisement
Related Manuals for Flexfire LEDs UltraBright Valor Premier Diffusion Series
Summary of Contents for Flexfire LEDs UltraBright Valor Premier Diffusion Series
- Page 1 Outdoor IP67 UltraBright™ Valor Premier Diffusion Series Installation Guide UL Listing and Compliance Information: Our products are safe to use and free from any hazardous substances. They are UL Listed in the USA and Canada. To comply with UL standards and inspections, please keep in mind that: A Class 2 power supply is to be used with each run of lights.
-
Page 2: Installation Instructions
UltraBright™ Valor Premier Diffusion Series LED Strip Light Installation Guide Installation Instructions Component Check LED Driver Front caps End caps Outdoor IP65 Grip Outdoor (IP67) UltraBright™ (included with the (included with the Connectors for Single Valor Premier Diffusion LED Strip Lights) LED Strip Lights) Color LED Strip Lights Series LED Strip Lights... - Page 3 UltraBright™ Valor Premier Diffusion Series LED Strip Light Installation Guide 4. Cut LED Strip Light to Required Length If you need to cut your LED strip light, first measure the length needed and only cut along the indicated cut marks with sharp scissors.
- Page 4 UltraBright™ Valor Premier Diffusion Series LED Strip Light Installation Guide 8. Install IP65 Grip Connectors Coat the open end of the strip and approximately 1” of the top of the strip in silicone sealant. (Due to the dome shaped nature of the strip, sealant does need to be applied to the top to fill in the gaps on the sides.) Slide the transparent case of your Outdoor IP65 Grip connector into the sleeve, until the strip is making proper contact with the end of the clear plastic.
- Page 5 UltraBright™ Valor Premier Diffusion Series LED Strip Light Installation Guide 12. Attach the Strip Light in Place Peel the rest of the cover of the 3M tape a few inches at a time while gently pressing the strip to the installation surface. Make sure the strip is secured on the surface.
- Page 6 Warranty You’re Covered! Flexfire LEDs’ Industry Leading Warranty We work our hardest to only use the highest quality components in our LED strip lights, drivers, controllers, and accessories. We recognize that most people do not use their lighting systems 24 hours a day, and would love to match our LED’s longevity data with a warranty that fits the majority of our customers’...