Intercoax IXWB-450 Quick Start Manual

Quick Start Guide
IXWB-450
Indoor/Outdoor Wireless Digital Bridge/CPE
Please read carefully the instruction manual before use. Depending
on the model, the image and the actual look of the product may vary.
Rev.2.0

Package

LAN cable
IXWB-450 Quick Start Guide
DIP Switch Digital Switch/ Reset
DIP 스위치 디지털 스위치/리셋
DC LAN1/PoE
24V PoE Power Adapter
LAN PoE
Switch, Computer, IP Camera & Etc.
Metal tie band

Hardware Overview

DIP Switch
DC
Digital
Switch/
Reset
LAN1/PoE
LAN2
LAN2

Hardware connection schematic diagram

Overview

This product is a 5G wireless bridge and the maximum
transmission distance is 2KM at optimal environment conditions.
Compare to wired equipment, it gives you cost-saving effect and
supports power supply through PoE which enables simpler and
faster installation.

Features

 Up to 2km Wireless Data Transmission
 1T1R SISO Support
 5Ghz Frequency Band
 Industrial Antenna Mounted
 Suitable for Long-Distance Transmission
 IP65
 Plug and Play, Various Configurations Support
To adjust the transformation between MASTER and SLAVE mode
of the wireless bridge.
Power interface,12V 1A DC power interface.
Both digital switch and reset button, short press the button
when electrifying, the numeric value of the digital tube will be
added one and press 15 seconds, the device will be restored to
the factory setting.
This is a data transmission port, and it is also a power port. When
the device works in the bridge mode, the interface acts as a LAN
port function. When the device works in the route mode, the
interface acts as a WAN port function. This interface is used to
connect the PoE interface to the PoE power.
This is a LAN data transmission port which can connect
computers, cameras, switches and other devices.
Bridge