Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual (or month and year of purchase if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
22g
58832
Advertisement
Related Manuals for Yukon 58832
Summary of Contents for Yukon 58832
- Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 58832 Visit our website at: http://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged.
-
Page 2: Table Of Contents
Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Page 2 For technical questions, please call 1-888-866-5797. Item 58832... -
Page 3: Important Safety Information
12. Maintain product labels and nameplates. Improper assembly can create hazards. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. SAVE THESE INSTRUcTIONS. Item 58832 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Specifications
Specifications Total Combined Weight Capacity 600 lb. Vise Capacity 7-1/4" Table Top Thickness 2-1/2" Page 4 For technical questions, please call 1-888-866-5797. Item 58832... -
Page 5: Assembly Instructions
Cross Brace to both Legs. 7. With assistance, place the Table Top (2) face down on a smooth, padded surface. This will allow installation of the sliding drawers. Item 58832 For technical questions, please call 1-888-866-5797. Page 5... - Page 6 (1,3) to Table Top’s underside per side. Table Top (2) Table Top (2) (1,3) (1,3) Sliding partition (8) Sliding partition (8) Table Top (2) Table Top (2) (1,3) (1,3) Page 6 For technical questions, please call 1-888-866-5797. Item 58832...
- Page 7 Note: Install Vise with slots facing up. panel (9) panel (9) Screwdriver Screwdriver 16. With the Vise Screw/Washer removed, slide the Vise into the three holes on the side of the Workbench. Item 58832 For technical questions, please call 1-888-866-5797. Page 7...
- Page 8 Table Top. Wood pegs (19) Wood pegs (19) Anvil pegs Anvil pegs (20) (20) Table Top (2) Table Top (2) The Workbench is now fully assembled and ready for use. Page 8 For technical questions, please call 1-888-866-5797. Item 58832...
- Page 9 Workbench. Check for: the Workbench with clean cloth. • loose hardware • misalignment or binding of parts • cracked or broken parts • any other condition that may affect its safe operation. Item 58832 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Parts List And Diagram
4 x 25 m m Wood Screw Left Drawer Slot Panel 4 x 30 m m Drawer Bolt Right Drawer Slot Panel 4 x 30 m m Wood Screw Note: A few pieces of extra hardware may be included. Page 10 For technical questions, please call 1-888-866-5797. Item 58832... - Page 11 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175447586 when ordering parts. Item 58832 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.