Controls And Features - Corsair VOID RGB ELITE USB Quick Manual

ENGLISH

CONTROLS AND FEATURES

A — HEADBAND ADJUSTMENT
B — CANTILEVERED ARM + HINGE
C — MUTE BUTTON
E
F
D — JOG DIAL (VOLUME + EQ)
E — MICROFIBER COVERED EAR PADS
F — MICROPHONE FOAM WINDSCREEN
(REMOVABLE)
A
B
C
D
1
GETTING STARTED WITH YOUR VOID RGB ELITE USB HEADSET
> Connect your headset to a USB port on your PC.
> Go to corsair.com/support/downloads to download the Corsair Utility Engine ("iCUE") Software. Using
the iCUE software will enable the full feature set of your headset.
Note: If the headset is used without software, some features will be disabled.
> Install the iCUE software on a PC running Windows® 7, Windows® 8.1, Windows® 10 or later.
> After installation is complete, reboot your PC, and launch iCUE.
iCUE SOFTWARE CAN BE USED TO
> Choose your RGB color preference and light intensity.
> Select and customize audio equalizer (EQ) settings.
> Adjust microphone input volume, and microphone side tone.
> Set 7.1 surround sound on or off.
Note: Prolonged listening at high volumes may adversely affect your hearing. Take breaks between sessions
and always begin with the volume at the lowest possible level before increasing.
HEADSET AUDIO SETTINGS
Short key press (0.1-0.5 seconds) on JOG DIAL D
Medium key press (0.6-2 seconds) on JOG DIAL
HEADSET MIC CONTROL
Short key press (0.1-0.5 seconds) on mic mute button
Long key press (2-4 seconds) on mic mute button
Note: iCUE software can also be used to control these features.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
toggles EQ.
D toggles 7.1 surround sound.
toggles mute on and off.
C
C toggles side tone on and off.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate this equipment.
This Class B digital apparatus meets all requirements
of the Canadian Interference-Causing Equipment
Regulations. CAN ICES-3(B)/NMB-3(B)
Cet appareil numérique de la class B respecte toutes
les exigences du Règlement sur le materiel brouilleur du
Canada. CAN ICES-3(B)/NMB-3(B)
2
ENGLISH