Advertisement
Quick Links
Advertisement
Summary of Contents for Bush Power BP6000MA
- Page 1 BP6000MA...
- Page 2 WARNING • Explosive gases may escape from the battery during charging. Prevent flames and sparks. Ensure area is well ventilated. • Before charging ensure you have read the instruction manual in full. • This appliance is for USE INDOORS. Do not expose to rain or excessive dust. • For charging 12 volt batteries only. • Disconnect from 240Volt supply before making or disconnecting connections to the battery. • This appliance requires an earthed 240Volt mains supply. • This appliance is not for use with non-rechargable batteries. • Never charge a frozen battery. • In the event of the AC cord beoming damaged it must be replaced by a qualified electrician. • Corrosive gasses may escape during the charging process, ensure charger is placed well away from battery. • This appliance is intended for use by responsible persons and should not be operated by children. • Always check battery manufacturers specifications on charge rates and voltage prior to charging.
-
Page 3: Product Features
PRODUCT FEATURES • Built-in microship monitoring and charging control system • Over charge protection • Short circuit protection • Reverse polarity protection with warning LED lights and beeping buzzer (ONLY WORKS WHEN BATTERY VOLTAGE ABOVE 2V) • Charging status indicators • Advanced 3 stage charging mode (Boost, Absorption, Float) • Battery selector switch - select the ideal charging mode for the type of battery • Charge body mounting • Clamp type and ring type charging connectors • Selectable charging amperage output • Positive and negative pule charging technology • Minimum start voltage: 0V • Soft start function to safely start charging the battery... - Page 4 Model No: BP6000MA Input 240VAC 50Hz Rechargable battery 17AH-360AH - 12V GEL, Lead type Acid and Calcium Charger Type 3 Stage automatic charger with positive and negative pulse mode Output charging voltage Gel - Charging 14.3V Float 13.3V Lead Acid - Charging 14.7V F loat 13.7V Calcium - Charging 15.5V Float 13.8V Charging Amp Selection 6 Amp Protection Short circuit, Overload, Over temperature, reverse polarity (LED flashing and warning buzzer beeping) Minimum start charging Zero volts voltage Working temperature C to 50 Waranty 12 months...
-
Page 5: Charging Instructions
CHARGING INSTRUCTIONS 1. Charger wiring connections: Ignition and all accessories in the vehicle (or boat etc) must be switched off before connecting the charger. This will ensure your battery will receive the maximum charge available shorten the time to fully charge it. Connect the red (positive) clamp of the charger to the positive terminal (post) of the battery. Connect the black (negative) clamp of the battery charge to the negative terminal of the battery. 2. Battery Type Selection: After connecting the charger correctly to the battery, plug the battery charger input plug to 240V AC mains power supply. The charger will default to charging on the “Lead Acid” type battery charging mode. If charging a Calcium or Gel type battery please choose the “Calcium or Gel” charging mode by pressing the battery selector switch. The Calcium or Gel indicator will then illuminte to show the type of charging mode that has been selected. 3. Selecting the charging amperage output: Press the current selecting button to regulate the maximum charging current. This function will improve the charging efficiency and safety. The battery charger will then supply a 2A, 4A, 6A current to the battery for soft start. Then after 5 econds of time the charger will supply its full selected charging amperage. 4. Charger disconnection: After charging the battery, turn off the 240V AC main power then unplug the charger input plug from 240V AC power source. Remove the black (negative) charger lead from the battery first, and then remove the red (positive) charger lead. -
Page 6: Led Indicators
LED INDICATORS: Power ON Red LED Boost Charge Mode Green LED Float Charge Mode Yellow LED Battery Type Red LED Amp Display Yellow LED... - Page 7 Warranty Card Name: Company Name: Address: Ph: Fax: E-mail: Purchased From: Date Purchased: Product Purchased (Model No.): Return Authority Number: Please Note: Proof of Purchase will be required for all warranty claims...