Specifications Step 1: Connect the supporting plate with supporting beam Connect the supporting plate (5) with supporting beam (4) with screws (A) and use allen key (H) to tighten. Column Stage 276lbs (125kg) (horizontality) Max. Weight Capacity 28.7"-54.3" (730-1380mm) Height Range 45.3"-66.9"...
Page 3
Step 3: Install feet Step 5: Install tabletop, handle and handset Connect feet (1) to the lifting columns (2) with screws (C) and use allen key (H) to tighten. Use screws (D) to install the tabletop on the frame, and use four screws (E) to install the handle in the center of the table.
Page 4
Handset Instruction Step 7: Install the cable management tray Firstly, rotate the screws (B) incompletely into the supporting beam (4) , which means do not tighten Height Adjustment them. Next, slide one side of the cable management tray (3) into the screws (B), then press the Press "▲"...
Attention Common Fault Treatment The following tips will help you detect and eliminate common faults and errors. If you experience a fault not listed below, please contact your supplier. Only the manufacturer and 1. Power supply: AC100V-240V, 50/60Hz certified professionals are capable of investigating and correcting those faults and errors. 2.