Dvd Test Mode - Pioneer AVIC-X940BT Service Manual

Hide thumbs Also See for AVIC-X940BT:
Table of Contents

Advertisement

5

6.2 DVD TEST MODE

The service test mode is used to check functions in fault diagnosis by a serviceman in case of any defect found in the
DVD mecha.
This mode is enabled only when the test mode is activated. At this time, no normal operation is executed.
1. Outline
The service test mode is used to check functions in fault diagnosis by a serviceman in case of any defect found in the
DVD mecha. No general user goes into this mode.
The mode is implemented mainly to check the FE part. It is originally the test mode at the FE part implemented in the
PC communication, which is modified to allow implementation in the HOST communication.
The command for the test mode received in the HOST communication is interpreted by the application part, converted
to the PC communication command and transferred to the OS.
The OS transfers this command to the PC task as if it received the command in the PC communication.
The execution result is noticed to the application part by an e-mail instead of the PC communication.
The application part then transmits the result in the HOST communication to display OSD.
2. Conditions for operation
(1) This service test mode is enabled only when the test mode is activated. At this time, no normal operation is executed.
3. To enter the test mode.
Before shifting to the test mode, please insert the "DISC (CD-DA)".
Operate the equipment by turning ON the parking.
2
Slave Test Mode
DVD REGION DISP
DVD DEBUG DISP
DVD TOUCH DIRECT
5
6
3
1
AVIC-X940BT/XNUC
6
7
1, 2 and 3 are invisible buttons.
Display the test mode screen by carrying out following
operations on this screen.
Press areas of 1, 2 and 3 long in order.
Detailed procedure
1. Display the source OFF screen.
2. Press the area of 1 long.
3. Press the area of 2 long.
4. Press the area of 3 long.
If the operations are completed successfully,
the screen shifts to the test mode screen after pressing 3 long.
The test mode is released by ACC-OFF operation.
In order to enter the DVD mechanism module test mode,
select "Slave Test Mode".
7
8
A
B
C
D
E
F
131
8

Advertisement

Table of Contents
loading

Table of Contents