Summary of Contents for Cannon Tools NIELSEN CT2065
- Page 1 CHAIN SLING-2M CT2065 ORIGINAL INSTRUCTIONS ORIGINAL INSTRUCTION SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.
-
Page 2: Ec Declaration Of Conformity
EC DECLARATION OF CONFORMITY We CANNON TOOLS LTD 20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K. Declare that the following machine complies with the appropriate basic safety and health requirements of the EC Directive based on its design and type, as brought into circulation by us. - Page 3 1. Safe Use Never load in excess of the rated capacity for the application. Passing under the lifting sling is forbidden. Keep records of use of the products, users should take a constant record of this product use. It’s better to make the records as professional habits of protection. Twist and shock should be forbidden in use.
- Page 4 product has been overload (has been tend to invalid), it must be take out of service. The product should be replaced as deformed dimension exceeding 1,0% of original dimension. 3. Maintenance Store connecting link on a properly designed rack. They should not be left lying on the floor where they may suffer mechanical or corrosion damage or may be lost.
-
Page 5: General Safety Rules
GENERAL SAFETY RULES The working load limit (WLL) should be applied in a straight pull and overloads should not be applied. Side loads should be avoided, as the products are not designed for this purpose and the application of a side load may significantly decrease the product life. - Page 6 Failure to observe this precautionary notice may cause a DANGER dangerous state, resulting in death or serious injury. DANGER Failure to observe this precautionary notice may cause a dangerous state, resulting in a medium-level or minor injury or damage on your properties. NOT shorten or adjust the sling chain by any means other than those methods approved by the sling chain manufacturer or qualified person.
- Page 7 STORAGE OF CHAIN SLINGS When not in use chain slings should be kept on a properly designed rack. They should not be left lying on the ground where they may be damaged. If the chain slings are to be left suspended from a crane hook, the chain sling hooks should be engaged in an upper link to reduce risk of chain sling legs swinging freely or snagging.
- Page 8 Item code Wall(T) B.L(T) A ± 1.5 B ± 1 L ± 2.5 K ± 2 H ± 1 8-SLR074-8 0.16 20.5 79.5 60.5 Item code A ± 0.5 B ± 1.5 D ± 1 H ± 2 L ± 1 E ±...
-
Page 9: Maintenance And Handling
Item code Wall (T) S x H 8-SLR032-8 4.25 8 + 0.5 x 25 MAINTENANCE AND HANDLING Possibility of corrosion increases for installations where salt air and high ● humidity are present. Make frequent and regular inspections of the sling chain’s condition and operation. - Page 10 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...
Need help?
Do you have a question about the NIELSEN CT2065 and is the answer not in the manual?
Questions and answers