Advertisement
Quick Links
Quick Installation Guide
Hitachi Travelstar 5K320
Models:
HTS543232L9A300
HTS543225L9A300
HTS543216L9A300
HTS543212L9A300
HTS543280L9A300
HTS543232L9SA01
HTS543225L9SA01
HTS543216L9SA01
HTS543212L9SA01
HTS543280L9SA01
Handling precautions
Set the drive down gently to prevent damage from impact or vibration.
Handle the drive carefully by the edges. Do not touch the exposed printed circuit board or any electronic components.
Do not press on the top or bottom of the drive.
Before handling the drive, discharge any static electricity from yourself and your clothing. With one hand touch an
unpainted metal surface, then touch the ESD bag with the other hand. Remain in contact with the chassis and the bag
for a minimum of two seconds.
Vibration, shock and static electricity to the drive will damage the precision parts. In particular, prevent vibration or
shock generated by dropping, knocking over or hitting the drive. Also, avoid touching the electrical components
directly, which can discharge electrostatic energy and damage the drive.
Page 1
HTE543232L9A300
HTE543225L9A300
HTE543216L9A300
HTE543212L9A300
HTE543280L9A300
version 1.0
Advertisement
Related Manuals for Hitachi Travelstar 5K320
Summary of Contents for Hitachi Travelstar 5K320
-
Page 1: Quick Installation Guide
Quick Installation Guide Hitachi Travelstar 5K320 Models: HTS543232L9A300 HTS543225L9A300 HTS543216L9A300 HTS543212L9A300 HTS543280L9A300 HTS543232L9SA01 HTS543225L9SA01 HTS543216L9SA01 HTS543212L9SA01 HTS543280L9SA01 Handling precautions Set the drive down gently to prevent damage from impact or vibration. Handle the drive carefully by the edges. Do not touch the exposed printed circuit board or any electronic components. - Page 2 Hitachi Global Storage Technologies Mounting Recommendations The mounting hole locations and size of the drive are shown below: Page 2 version 1.0...
- Page 3 Hitachi Global Storage Technologies The drive will operate in all axes (six directions) and will stay within the specified error rates when tilted ±5 degrees from these positions. Performance and error rate will stay within specification limits if the drive is operated in the other permissible orientations from which it was formatted.
-
Page 4: Interface Connector
Hitachi Global Storage Technologies Interface connector The figure below shows the physical pin location All pins are in a single row, with a 127 mm (0.050”) pitch. The comments on the mating sequence in Table in the section 7.3 apply to the case of back-plane blind-mate connector only. - Page 5 Hitachi Global Storage Technologies’ trademarks are authorized for use in countries and jurisdictions in which Hitachi has the right to use, market and advertise the brands. The Travelstar trademark is authorized for use in the Americas, EMEA and the following Asia-Pacific countries and jurisdictions: Australia, Hong Kong, Japan, New Zealand, South Korea and Taiwan.