Page 2
USER MANUAL NORTH AMERICA E-mail: support@homech.net(US) support.ca@homech.net(CA) MANUFACTURER Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd. Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China Homech Tower Fan Model: HM-TF001 Intertek 3079598 MADE IN CHINA Rev_1.4_EN...
Contents IMPORTANT SAFETY INSTRUCTIONS ------- Fused Safety Plug - For US Only --------------- Package Contents ---------------------------------- Product Diagram ----------------------------------- Assembly Instructions ---------------------------- Control Panel ---------------------------------------- Remote Control ------------------------------------- LED Display ------------------------------------------ Specifications ---------------------------------------- Battery Replacement ------------------------------ Cleaning and Maintenance --------------------- Warranty and Service -----------------------------...
User Manual. Any other use is not recommended that may cause fire, electric shock, or injury to persons. Thanks for choosing Homech Tower Fan. Please read this User Manual thoroughly before use and retain it for ELECTRICITY SAFETY future reference.
Page 5
IMPORTANTES CONSIGNES • DO NOT place any clothes or curtains on the product as they could be sucked into the fan during operation and damage the product. DE SÉCURITÉ • During use, keep hands, hair, clothing and utensils away from the AVANT D'UTILISER CET APPAREIL, LISEZ TOUTES LES INSTRUCTIONS safety guard to avoid injuries and damage of the product.
Page 6
SÉCURITÉ ÉLECTRIQUE • Veillez toujours à placer le ventilateur sur une surface plane et horizontale avant de l'utiliser. • Cet appareil doit être alimenté en tension correcte par une prise de • Gardez le cordon hors des zones de circulation intense et des courant installée par un professionnel.
Do not unplug by pulling on cord. Package Contents • Slide fuse cover, located on the top of the plug, towards the prongs of the plug. ・1 x Homech Tower Fan Body (HM-TF001) ・1 x Front Fan Base Package Contents ・1 x Rear Fan Base ・3 x Thumb Screws...
Product Diagram Assembly Instructions 1. Unscrew the 3 thumb screws (attached to the body bottom) first before assembly. Control Panel LED Display Air Outlet 2. Run the power cord through the central gap between the two halves of the unassembled fan base. Rear Fan Base Power Cord Front Fan Base...
Page 9
3. Connect the front and rear base parts by pushing the plastic pegs 5. Place the power cord into the cord guides along the inside of fan on one half into the corresponding slots on the other half. base, exit through the notched opening, to ensure a flat and stable base for the fan.
Control Panel Button Control Symbols Button Function Displayed · Press once to turn on at default Low Speed: setting (Low Speed & Normal Mode). SPEED · Press once again to turn off. ON/OFF · If power is not disconnected, it will Normal Mode: always remember your last settings AUTO...
LED Display Symbols Button Function Displayed Press to turn on or exit AUTO mode. SPEED Once enabled, the fan speed is adjusted intelligently according to Auto MODE AUTO: TIMER TEMP the ambient temperature. Auto AUTO ・Ambient temperature ≥79°F (26°C): Fan runs normally ・Ambient temperature ≤75°F (24°C): Fan stops LED Display Symbols...
This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, Model HM-TF001 it can cause severe internal burns and can lead to death in as little as 2 Rated Power hours.
Warranty and Service This product is covered with Homech product and labor warranty for 12 months from the date of its original purchase. If any problems occur, please contact the Homech Customer Care Centre via the contact information listed in this User Manual.
Need help?
Do you have a question about the HM-TF001 and is the answer not in the manual?
Questions and answers
does it have heat settings
No, the Homech HM-TF001 does not have heat settings.
This answer is automatically generated