Summary of Contents for Raptor Arctic Tern
- Page 1 Arctic Tern ModBMC System / PCIe Development Kit User's Guide For System Configuration and Set Up © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com...
-
Page 2: Table Of Contents
JTAG Programming Headers..........................16 Power Jumpers (3.3v Aux)..........................17 Power Jumpers (12v)............................18 Power Jumpers (3.3v Host)..........................19 PCI Express................................. 20 ModBMC Socket 1.............................. 22 © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... - Page 3 BMC Firmware ROM............................38 PNOR Flash ROM..............................39 System Fans............................... 40 CPU fans................................41 Ethernet................................42 LED Displays............................... 43 SUPPORT..........................44 Getting Help................................ 44 © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com...
-
Page 4: Copyright And Disclaimers
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF RAPTOR COMPUTING SYSTEMS, LLC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. -
Page 5: Safety Information
• Place the product on a stable surface at all times. • If you encounter technical problems with the product, contact a qualified service technician or your retailer. © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved... -
Page 6: Notices
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved... -
Page 7: Arctic Tern Module Specifications
Environmental Requirements Operation: 10°C - 35°C Storage: -40°C - 70°C Humidity: 20% - 90%, non-condensing NOTE: Specifications are subject to change without notice. © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 8: System Overview
System Overview DESIGN The Arctic Tern module has been specifically designed for applications requiring high security, small form factor, and minimal power requirements. Multiple modules may be connected together for enhanced functionality, using the on-board SERDES links. The AT1PEC1 carrier card allows up to two modules to be installed, although most on-card features will function with only the first module installed. - Page 9 Illustration 2: Arctic Tern Dual Module PCIe Carrier Block Diagram © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com...
-
Page 10: Module Installation And Removal
Installation is complete once the latches engage and the module no longer attempts to return to an angled position away from the carrier card. © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved... -
Page 11: Module Removal
CAUTION: Attempting to over-rotate or otherwise mechanically force the module away from the carrier card can result in damage to the socket and/or module. Damage caused by improper installation or removal is not covered under warranty. © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved... -
Page 12: Headers And Connectors
Single row headers use a monotonically increasing pin number, starting from pin 1. Key pins are not physically present, but are still counted as pins in the numbering scheme. © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved... -
Page 13: Rtc Backup Battery Socket
RTC BACKUP BATTERY SOCKET 376 / 377 Coin Cell Battery (+ up) BT`1 Function Function + Power + Power Ground © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 14: Bmc I2C Ports
FPGA Pin Function I2C_BMC_SCL Ground I2C_BMC_SDA J101 (Middle) FPGA Pin Function I2C_BMC_SCL Ground I2C_BMC_SDA J102 (Right) FPGA Pin Function I2C_BMC_SCL Ground I2C_BMC_SDA © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 15: Pcie Jtag Header
PCIE JTAG HEADER J10100 FPGA Pin Function FPGA Pin Function JTAG_TCK JTAG_TDO JTAG_TDI JTAG_TMS JTAG_TRST_N Ground © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 16: Jtag Programming Headers
J10107 / J10108 (Top / Bottom) (Module 1 / Module 2) FPGA Pins Function FPGA Pins Function JTAG_TMS JTAG_TDI JTAG_TDO JTAG_TCK Ground +3.3V Aux Power © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 17: Power Jumpers (3.3V Aux)
+3.3V Aux power Place jumper caps across pins 1 and 2 on J10121 and J10122 to connect 3.3V Aux power to PCIe. © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 18: Power Jumpers (12V)
Function Function +12V power PCIe power pins Place jumper cap across pins 1 and 2 to connect 12V Aux power to PCIe. © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 19: Power Jumpers (3.3V Host)
+3.3V host power PCIe connector power pins Place jumper cap across pins 1 and 2 to connect 3.3V Host power to PCIe. © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 20: Pci Express
PRSNT2_N (Connected to PRSNT1_N) PER_0_P PER_0_N Power 12V Power 12V Power 12V Power 12V Power 3.3V Power 12V Power 3.3V Power 3.3V Power © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... - Page 21 Ground Ground Note: EXP0 and EXP1 are used to refer to the GPIO expanders onboard each Arctic Tern module, where EXP0 is attached to I2C bus 4 and EXP1 is attached to I2C bus 5. © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00...
-
Page 22: Modbmc Socket 1
EXP0/GPOI0 GPIO7 PWM0 PWM2 PWM1 PWM4 (No connect) PWM3 PWM6 (No connect) PWM5 (No connect) Ground PWM7 (No connect) EXP0/GPOI1 GPIO15 EXP0/GPOI3 GPIO19 © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... - Page 23 TACH10 (No connect) EXP0/GPOI16 GPIO67 TACH11 (No connect) 101 EXP0/GPOI17 GPIO69 TACH12 (No connect) EXP1/GPOI0 GPIO71 TACH13 (No connect) EXP1/GPOI1 GPIO73 TACH14 (No connect) © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com...
- Page 24 PCIE_CLK_P JTAG_RST Ground JTAG_TDO LPC_RST# JTAG_TDI LPC_LAD1 JTAG_RTCK LPC_LAD0 JTAG_TCK LPC_IRQ# JTAG_TMS LPC_FRAME# LPC_LAD3 LPC_LAD2 LPC_CLK I2C9_SCL I2C9_SDA Ground I2C10_SCL (No connect) © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com...
- Page 25 Ground AUX_SPI_CS0# I2C11_SCL (No connect) COLOR CODES GPIO PWM / TACH Serial (UART) HDMI / HSYNC / VSYNC / DDC PCIE JTAG © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com...
-
Page 26: Mini Hdmi
J13062 / J13082 (top / bottom) Function Function TMDS2_GND TMDS2_P TMDS2_N TMDS1_GND TMDS1_P TMDS1_N TMDS0_GND TMDS0_P TMDS0_N TMDS_CLK_GND TMDS_CLK_P TMDS_CLK_N DDC_CEC_GND DDC1 DDC2 NC (No connect) HOT_PLUG_DET © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 27: Modbmc Socket 2
CONSOLE_RX DDC_DAT CONSOLE_TX Ground EXP0/GPOI0 GPIO7 Ground EXP0/GPOI1 GPIO15 EXP0/GPOI3 GPIO19 EXP0/GPOI2 GPIO17 EXP0/GPOI4 GPIO20 Ground EXP0/GPOI5 GPIO21 UART1_RX UART2_RX UART2_TX UART2_TX © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... - Page 28 I2C16_SCL (No connect) EXP0/SDA I2C4_SDA I2C16_SDA (No connect) EXP1/GPOI9 GPIO98 (No connect) Ground 140 EXP1/GPOI10 GPIO99 (No connect) I2C12_SCL PCIE_RST# I2C12_SDA UART3_RX Ground UART3_TX © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com...
- Page 29 VDD_LPC3V3 PCIE_TX_N 154 EXP1/GPOI11 GPIO106 (No connect) PCIE_TX_P 156 EXP1/GPOI12 GPIO107 (No connect) Ground GPIO108 (No connect) PCIE_CLK_N GPIO109 (No connect) PCIE_CLK_P © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com...
-
Page 30: Low Pin Count (Lpc)
LPC_FRAME_N NC2 (No connect) LPC_RESET_N NC1 (No connect) LPC_AD3 LPC_AD2 3V3_AUX LPC_AD1 LPC_AD0 Ground TPM_SCL TPM_SDA 3V3_AUX LPC_SERIRQ Ground LPC_CLKRUN_N WINDOW_OPEN_N TPM_GPIO0 © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 31: Flexible Service Interface (Fsi)
FLEXIBLE SERVICE INTERFACE (FSI) J200 FPGA Pin Function Function GPIO_CARD1_3 Ground GPIO_CARD1_1 Ground GPIO_CARD1_0 © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 32: Pmbus
PMBUS J201 Function Function I2C_BMC12_SCL I2C_BMC12_SDA EXP1/GPOI0 GPIO_CARD1_71 Ground No connect © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 33: Card 1 Com Ports
CARD 1 COM PORTS J24 / J25 (Bottom/Top) (COM1 / COM2) Function Function COM_DCD COM_RXD COM_TXD COM_DTR Ground COM_DSR COM_RTS COM_CTS COM_NRI © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 34: Gpio Bank 1
EXP1/GPOI9 GPIO_CARD1_98 EXP1/GPOI10 GPIO_CARD1_99 EXP1/GPOI11 GPIO_CARD1_106 EXP1/GPOI12 GPIO_CARD1_107 GPIO_CARD2_0 GPIO_CARD2_1 GPIO_CARD2_3 EXP0/GPOI0 GPIO_CARD2_7 EXP0/GPOI1 GPIO_CARD2_15 +3.3 Aux Power +3.3 Aux Power Ground Ground © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 35: Gpio Bank 2
EXP0/GPOI6 GPIO_CARD2_25 EXP0/GPOI7 GPIO_CARD2_35 EXP0/GPOI8 GPIO_CARD2_37 EXP0/GPOI9 GPIO_CARD2_44 Ground Ground +3.3V Host Power +3.3V Aux Power Ground Ground +12V Power +12V Power © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 36: Card 2 Console Com Port
CARD 2 CONSOLE COM PORT J400 FPGA Pin Function Ground CONSOLE_RX (ModBMC Socket 2) CONSOLE_TX (ModBMC Socket 2) © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 37: Card 2 Host Com Port
CARD 2 HOST COM PORT J401 FPGA Pin Function Ground UART1_RX (ModBMC Socket 2) UART1_TX (ModBMC Socket 2) © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 38: Bmc Firmware Rom
RESET (Active low) NC1 (No connect) CS (Active low) SO / SIO1 WP (Active low) / SIO2 Ground SI / SIO0 SCLK © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 39: Pnor Flash Rom
RESET (Active low) NC1 (No connect) CS (Active low) SO / SIO1 WP (Active low) / SIO2 Ground SI / SIO0 SCLK © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 40: System Fans
SYSTEM FANS J7900 (Left) FPGA Pin Function Ground +12V Power Tachometer J7901 (Right) FPGA Pin Function Ground +12V Power Tachometer © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 41: Cpu Fans
CPU FANS J7902 (Left) FPGA Pin Function Ground +12V Power Tachometer J7903 (Right) FPGA Pin Function Ground +12V Power Tachometer © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 42: Ethernet
TRD3+ TRD2+ TRD2- TRCT2 TRCT4 TRD4+ TRD4- TRD1- TRD1+ TRCT1 D / ORG- D / GRN- COMM Ground GRN- GRN+ Ground Ground © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 43: Led Displays
LED DISPLAYS LD1 / LD2 / LD3 / LD4 (left to right) Function Function CATHODE © 2017 - 2022 Raptor Computing Systems, LLC AT1PEC1 User's Guide Version 1.00 All Rights Reserved https://www. raptorcs.com... -
Page 44: Support
Support GETTING HELP If you require assistance operating your Arctic Tern system, you may contact Raptor Computing Systems support@raptorcs.com technical support directly at . Alternatively, we also have a Wiki and other support https://www.raptorcs.com resources available online at ; the information you require may already be available on one of these resources.
Need help?
Do you have a question about the Arctic Tern and is the answer not in the manual?
Questions and answers