Summary of Contents for Zonit Z-ATS-IND
- Page 1 Zonit Z-ATS-IND™ Users Guide Version 1.1 Copyright © 2021-22 Zonit Structured Solutions LLC All Rights Reserved...
-
Page 2: Table Of Contents
The Z-ATS-IND™ unit must be disconnected from the A and B power input sources and the load(s) attached to its output. Do not overload the Z-ATS-IND™ unit by attaching an electrical load to its output that draws more current than the Z-ATS-IND™ is rated to deliver. -
Page 3: Product Overview
+ UPS power sources without risking downtime. The Z-ATS-IND™ has voltage level sensing on the A side only and will switch to the B side if the A input voltage is ... -
Page 4: Pre-Installation Considerations
Insure that the needed power capacity that will be drawn by the Z-ATS-IND™ is available in the both the A and B circuits the Z-ATS-IND™ is connected to. This is necessary for the Z-ATS-IND™ to failover correctly and insure connected load uptime. -
Page 5: De-Installation
If it is desired or required to mount the Z-ATS-IND™ to a DIN rail, then insert the 35mm top-hat DIN rail into the compatible provided case slots or use the optional µATS DIN Rail Adapter Kit (Part Number: Z-ATS-IND-DIN- (1,2.3) and follow the included instructions to physically attach the Z-ATS-IND™... -
Page 6: Optional Accessories
This kit consists of an IEC C14 to IEC C13 extension cord. It is used to connect the Z-ATS-IND™ to the equipment being powered in situations where clearance to plug it in directly is an issue or it is desired to place the Z-ATS-IND™ in a location where its indicators can more conveniently be viewed. -
Page 7: Warranty
This warranty does not include repair or replacement of any connected equipment. This warranty excludes damage to Zonit product if a surge or spike reaches the product through an unprotected source connected to it. It does not apply to any product which has been repaired or altered in any manner by anyone other than Zonit Structured Solutions, LLC or to any product which has been installed, connected, used, or otherwise adjusted other than in accordance with written instructions furnished by Zonit Structured Solutions, LLC.