Powell 697-434T2 Assembly Instructions

Thank you for purchasing this Powell product. We want to make sure it is complete and to your satisfaction. Please
check all packing material carefully for small parts which may have come loose inside the carton during shipment.
make sure they match with the illustrations herein and are all present. If any part(s) are missing or defective please
contact Powell Customer Service. Contact information is given se pa r ately o n p arts re quest form . If you feel the item
is defective beyond a resolution with part replacements, please return this product with your receipt to the place of
purchase. If purchased from an internet retailer, please contact their customer service department. Photos and
additional information may be requested to validate the claim. Product is not to be returned to the Powell Company
under any circumstance unless authorized by the Powell Company or an authorized dealer or representative.
Thank you.
ATTENTION: SOME LETTERED PARTS LISTED ON THE INSTRUCTION SHEET MAY NOT BE IN PARTS BAG AS THEY
MAY ALREADY BE ASSEMBLED. CAREFULLY CHECK PARTS AND PACKING MATERIALS PRIOR TO ORDERING
REPLACEME
WARNING: DO NOT FULLY TIGHTEN SCREWS AND BOLTS UNTIL ALL PARTS HAVE BEEN ASSEMBLED PROPERLY.
TO PREVENT SCRATCHING THE TOP SURFACE, ASSEMBLE PRODUCT ON A SMOOTH SURFACE.
DO NOT OVER TIGHTEN SCREWS AND BOLTS.
Tools Required for assembly: Allen Wrench (provided)
ASSEMBLY INSTRUCTIONS (TW)
MODEL NO. 697-434T2
Phillips Screwdriver (not
697-434B
Made in China
provided)