Download Print this page

Hitachi Travelstar 40GN Quick Installation Manual

2.5 inch ata/ide hard disk drive
Hide thumbs Also See for Travelstar 40GN:

Advertisement

Quick Links

Quick installation guide

Hitachi Travelstar 60GH & 40GN
2.5 inch ATA/IDE hard disk drive
Enhanced Availability models
Models:
IC25T060ATCX05
IC25N040ATCX04
IC25N030ATCX04
IC25N020ATCX04
IC25N010ATCX04
Handling precautions
Wear a grounded wrist strap while handling the drive
to prevent damage from Electrostatic Discharge
(ESD).
Set the drive down gently to prevent damage from
impact or vibration.
Do not open the ESD bag containing the drive until
needed.
Handle the drive carefully by the edges. Do not
touch the exposed printed circuit board or any
electronic components.
Do not press on the top or bottom of the drive.
Do not cover the drive's breather hole.
Quick installation
Installation of this Hitachi Travelstar drive in some note-
books may require use of unique hardware (such as
mounting trays, connecting cable, insulating material). If
you are uncertain if hardware is needed, consult your
notebook manufacturer as this operation may require a
qualified technician.
Back up all data before proceeding with installation.
1. Set the jumpers
Master drive. No jumper is required if the drive is
the only drive in a system or the Master drive in a
two-drive system.
Slave drive. If this is the Slave drive in a system,
place a jumper in setting A2. (See the A2 setting in
the illustration.)
Cable Select. Setting A3 in the illustration. Consult
the system manual to see if your computer supports
Cable Select
.
Page 1
Jumper settings
A1.
A2.
A1. Master
A2. Slave
A4 & A5. Never attach a jumper in these positions!
2. Attach the drive
For assistance on the physical installation of the drive,
consult your system manual.
3. Configure the computer
1. Turn on the computer.
2. Enter Setup.
3. Go to Hard Disk Drive Configuration.
4. Select Autodetect if it is available.
5. If Autodetect is not available, set to User and set to
appropriate parameters from the table below.
6. Save the settings.
7. Exit.
8. Reboot the system from a floppy disk.
Model Number
Cylinders
IC25T060ATCX05
16,383
IC25N040ATCX04
16,383
A3.
A4.
A5.
Pin 1
djsa_qi1.prz
A3. Cable Select
Sectors/
Capacity
Heads
Track
(GB)
8
63
60
4
63
40
version 1.1

Advertisement

loading

Summary of Contents for Hitachi Travelstar 40GN

  • Page 1: Quick Installation Guide

    Do not press on the top or bottom of the drive. Do not cover the drive’s breather hole. Quick installation Installation of this Hitachi Travelstar drive in some note- books may require use of unique hardware (such as mounting trays, connecting cable, insulating material). If...
  • Page 2 References in this publication to Hitachi Global Storage Technologies products, programs or services do not imply that Hitachi Global Storage Technologies intends to make these available in all countries in which Hitachi Global Storage Technologies operates. Product information is provided for information purposes only and does not constitute a warranty.

This manual is also suitable for:

Travelstar 60ghIc25n010atcx04Ic25n020atcx04Ic25n030atcx04Ic25n040atcx04Ic25t060atcx05