Young Living AromaCare Operation Manual page 4

Operating Instructions
1. Press down on the pump until
it pops up. Gently pull to remove
the pump.
Note: The pumps come with no
bottle attached.
4. Insert the pump into the diffuser, being sure to align
the markings on the pump with the markings on the unit,
and press down.
6. Turn the Power On/Off button to start the diffuser.
2. Remove the outer cap,
then use the enclosed orifice
remover tool to remove the
plastic orifice reducer on
the bottle.
3
3. Insert the appropriate length
tube into the bottom of the
pump and screw it onto the
desired oil bottle.
5. Connect the power supply.
Note: Essential oils with a higher viscosity
will diffuse differently.
You may or may not see the mist,
depending on which oil is diffusing.