Intex SCL306 Owner's Manual

Multi-color led pool sprayer

Hide thumbs

INTEX

MULTI-COLOR LED POOL SPRAYER

READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT

• Assembly and disassembly by adults only.

• This is not a toy. Do not allow children to play with this product.

• Never grab, pull, push, lean on or obstruct the sprayer at any time.

• Ensure all the clamp screws, adaptor A and hose are securely attached.

• This product is intended to be used only for the purposes described in the

manual.

FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY AND

USE INSTRUCTIONS MAY RESULT IN SERIOUS INjURY, DROWNING

OR PROPERTY DAMAGE.

NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to scale.

REF. NO.

Sprayer head set

Top & bottom cover with screws set

Sprayer clamp with screws

Adaptor A

SAVE THESE INSTRUCTIONS

(285PO) LED POOL SPRAYER ENGLISH SIZE: 4.875" X 7.25" 04/19/2020

OWNER'S MANUAL

Model SCL306

WARNING

PARTS LIST

DESCRIPTION

Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas

registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/Intex

Marketing Ltd. to/à/a/an Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach,

CA 90801 • Distributed in the European Union by/Distribué dans l'Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der

Europäischen Union durch/Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands

www.intexcorp.com

Page 1

English

QTY.

SPARE PART NO.

12273

12272

12280

10849

Page 2

285-*PO-R0-2104

285

Table of Contents

Need help?

Do you have a question about the SCL306 and is the answer not in the manual?

Questions and answers

Summary of Contents for Intex SCL306

Page 1 Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China. ®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands www.intexcorp.com...
Page 2 (285PO) LED POOL SPRAYER ENGLISH SIZE: 4.875” X 7.25” 04/19/2020 English General • No tools are required for the assembly. • Fits all round and rectangular Metal Frame and Ultra Frame pools (not suitable for Easy Set, Oval and Panel pools). • Built-in hydroelectric generator powers the LED light, no batteries or electrical connection required. • Lights in 3 colors: red, blue and green. Preset 10 seconds between color change. Best seen at night or under low light condition. • Pump flow rate required: 3,785-12,112 L/h (1,000-3,200 gph). System flow rate required: 2,271- 7,570 L/h (600-2000 gph). • Make sure the pump and the pool are setup and filled with water first. • Remove the sprayer before placing a pool cover over the pool. • When not in use remove from the pool and store in a safe place indoors. • For pool and filter pump problems refer to their respective owner’s manual. Setup 1. Place the sprayer clamp over the selected horizontal top beam of the metal frame pool, within reach of the filter pump return hose, and tighten the clamp screws by hand. See fig 1. FIG (1) 2.
Page 3 5. The original packing can be used for storage. TROUBLE SOLUTION • Ensure the filter pump is operating and connect the LED LED light is off / pool sprayer to the water return hose, see “Setup” section. • Check if the pump system flow rate is within the specified flashing range, if the system flow rate is less than 2,271 L/h (600 gph), change pump with higher system flow rate. • Clean or replace the filter pump cartridge. If using a sand filter, ensure the sand media is clean by backwashing it. • Use a garden hose to wash the sprayer head opening, check to see if any sand or deposits in the sprayer head set. • Contact Intex Service Center. Poor water cascade • Use fingers to wipe away any dirt on the sprayer head opening. performance • The performance depends on the filter pump flow rate. If you are not satisfied with the water cascade performance, a higher flow rate filter pump is recommended. Water spraying out of • The performance depends on the filter pump flow rate, change pump with lower system flow rate. the pool SAVE THESE INSTRUCTIONS Page 3...
Page 4 (285PO) LED POOL SPRAYER ENGLISH SIZE: 4.875” X 7.25” 04/19/2020 English Limited Warranty Your LED pool sprayer has been manufactured using the highest quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. This Limited Warranty applies only to the LED pool sprayer. The provisions of this Limited Warranty apply only to the original purchaser and is not transferable. This Limited Warranty is valid for a period of one (1) year from the date of the initial retail purchase. Keep your original sales receipt with this manual, as proof of purchase will be required and must accompany warranty claims or the Limited Warranty is invalid. If a manufacturing defect is found within this one (1) year period, please contact the appropriate Intex Service Center listed in the separate “Authorized Service Centers” sheet. The Service Center will determine the validity of the claim. If the Service Center directs you to return the product, please carefully package the product and send with shipping and insurance prepaid to the Service Center. Upon receipt of the returned product, the Intex Service Center will inspect the item and determine the validity of the claim. If the provisions of this warranty cover the item, the item will be repaired or replaced at no charge. Any and all disputes regarding the provisions of this Limited Warranty shall be brought before an informal dispute settlement board and unless and until the provisions of these paragraphs are carried forth, no civil action may be instituted. The methods and procedures of this settlement board shall be subject to the rules and regulations set forth by the Federal Trade Commission (F.T.C.). IMPLIED WARRANTIES ARE LIMITED TO THE TERMS OF THIS WARRANTY AND IN NO EVENT SHALL INTEX, THEIR AUTHORIZED AGENTS OR EMPLOYEES BE LIABLE TO THE BUYER OR ANY OTHER PARTY FOR DIRECT OR CONSEQUENTIAL DAMAGES OR LIABILITIES. Some states, or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This Limited Warranty does not apply if the LED pool sprayer is subject to negligence, abnormal use or operation, accident, improper operation, improper voltage or current contrary to operating instructions, or to damage by circumstances beyond Intex’s control, including but not limited to, ordinary wear and tear and damage caused by exposure to fire, flood, freezing, rain, or other external environmental forces. This Limited Warranty applies only to those parts and components...
Page 5 (285PO) LED POOL SPRAYER ENGLISH SIZE: 4.875” X 7.25” 04/19/2020 English WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. SAVE THESE INSTRUCTIONS Page 5...

Intex SCL306 Owner's Manual

Table of Contents

Need help?

Questions and answers

Related Manuals for Intex SCL306

Summary of Contents for Intex SCL306

Table of Contents