Little Giant AIRDECK Replacement

Little Giant AIRDECK Replacement

Advertisement

AIR DECK
READ THESE INSTRUCTIONS COMPLETELY BEFORE YOU START. IF YOU DON'T UNDERSTAND THESE
INSTRUCTIONS, PLEASE CALL OUR CUSTOMER EXPERIENCE TEAM AT 800-453-1192 FOR
Procedure for replacing the hanger on Little Giant Ladder Systems AIRDECK.
1. Failure to comply with all instructions may result in serious injury.
2. Make sure this kit is compatible with your accessory. Before installing this kit, identify all kit
components. If any components are missing, damaged or if you have any questions concerning the
use of this kit on Little Giant Ladder Systems products, please contact our Customer Experience Team
at 800-453-1192. Do not substitute any components.
3. Inspect the accessory before installing this kit. Repair or replace any damaged or missing accessory
parts before using the ladder. Use only Little Giant Ladder Systems repair or replacement parts. If you
are unable to repair it, discard the accessory.
NOTE: IF ANY OTHER PART OF THE ACCESSORY IS DAMAGED BEFORE OR DURING THE PROCESS
OF INSTALLING AND/OR REPAIRING, PLEASE CONTACT OUR CUSTOMER EXPERIENCE TEAM FOR
ASSISTANCE AT 800-453-1192. DO NOT USE A DAMAGED ACCESSORY!
HANGER REPLACEMENT
®
ASSISTANCE. YOUR SAFETY IS VERY IMPORTANT TO US.

COMPONENTS IN KIT

®
(1) HANGER
82179 v0 6.17 (1)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AIRDECK and is the answer not in the manual?

Questions and answers

Summary of Contents for Little Giant AIRDECK

  • Page 1 3. Inspect the accessory before installing this kit. Repair or replace any damaged or missing accessory parts before using the ladder. Use only Little Giant Ladder Systems repair or replacement parts. If you are unable to repair it, discard the accessory.
  • Page 2 2. To remove the old hanger, start by rotating it up 1. Identify the location of the hanger to be and away from the tray. replaced. 3. While holding the hanger up, squeeze in on the 4. Remove and discard the old hanger. sides of the hanger to disengage it from the holes in the tray.

Table of Contents