Advertisement
5.
MAINTENANCE
WARNING! Disconnect drill from air supply before changing accessories, servicing or
p
performing maintenance. Replace or repair damaged parts. Use genuine parts only.
Non-authorised parts may be dangerous and will invalidate the warranty.
5.1.
Lubricate the air drill daily with a few drops of Sealey air tool oil dripped into the air inlet to
prolong its life.
5.2.
Clean the drill after use.
5.3.
Loss of power or erratic action may be due to the following:
a) Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect size or
type of hose connectors. To remedy check the air supply and follow instructions in
chapter 3.
b) Grit or gum deposits in the drill may also reduce performance. If your model has an air
strainer (located in the area of the air inlet), remove the strainer and clean it. Flush the
drill out with gum solvent oil or an equal mixture of SAE No 10 oil and paraffin.
Allow to dry before use.
5.4.
For a full service contact your local Sealey service agent.
5.5.
When not in use, disconnect from air supply, clean drill and store in a safe, dry,
childproof location.
Reversible Air Drill, Model No. SA620 when operated in accordance with these instructions and
tested in accordance with BS EN ISO 8662-6:1995, ISO 8662-6:1994
and BS EN ISO 8662-7:1997 results in the following vibration emission declared in accordance
with BS EN 12096:1996.
Measured vibration emission value: 0.39m/s²
These values are suitable for comparison with emission levels of other tools that have been
subject to the same test.
This tool may cause hand-arm vibration syndrome if its use is inadequately managed.
This is a 'NO LOAD' vibration figure.
A competent person should carry out a risk assessment following HSE guidelines.
Measurement results can be highly variable, depending on many factors, including the operator's
technique, the condition of the work equipment, the material being processed and the
measurement method.
Recommended Measures to reduce risk of hand-arm vibration syndrome:
We recommend appropriate safety equipment is utilised and regular breaks for the operator are
employed to reduce any residual risk of fatigue or repetitive strain injury.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Risk of Hand Arm Vibration Injury
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
Uncertainty: 0.16m/s²
www.sealey.co.uk
01284 757500
Web
sales@sealey.co.uk
01284 703534
email
SA620 Issue: 5 - 14/06/11
Advertisement
