Advertisement
2. INTRODUCTION AND SPECIFICATION
High velocity industrial two-speed drum fan suitable for movement of huge volumes of air. Robust unit with heavy-duty steel casing, guard and
frame. Wheels and handle for easy manoeuvrability. Carefully balanced and fully guarded blades provide quiet and safe operation. Suitable for
use in industrial, commercial, agricultural and automotive workshop and showroom applications.
Fan Diameter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 915mm(36")
Speeds: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 735/940rpm
Maximum Airflow:. . . . . . . . . . . . . . . . . . . . . . . . . . . 258mtr³/min
Motor: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V – 50Hz - 260W
Current: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4A
3. OPERATION
WARNING! Ensure you read, understand and apply the safety instructions in Chapter 1 before using the fan.
!
3.1.
The fan is easily transportable by means of the wheels provided. Lift by the handle on the main body of the fan on the side opposite the
wheels and manoeuvre the fan into position. Ensure that there is nothing in front of the fan that may be disturbed when the fan is switched on.
3.2.
Check that the speed control box situated in the recess in the rear grille of the fan is set to "OFF". Uncoil the power lead from its
stowage position and plug into the mains power supply. Ensure that the power lead is not stretched or positioned in such a way as to
cause a hazard. Switch the power on.
3.3.
Turn the fan on by rotating the control knob from "OFF" to "LOW". If a greater air flow is required turn the knob to the "HIGH" setting.
3.4.
When you have finished using the fan ensure you turn the speed control switch to "OFF" and disconnect the fan from mains power.
3.5.
Recoil the lead onto the stowage hooks situated within the recess in the rear grille.
4. MAINTENANCE
WARNING! Ensure the fan is disconnected from the mains power supply before attempting any of the following:
!
4.1.
Use a soft, damp cloth to clean the body of the fan.
DO NOT splash water onto the fan and never allow water to drip onto the motor housing.
DO NOT use solvents, petroleum, paint thinner or other chemicals to clean the fan.
4.2.
If it becomes necessary to clean the fan blades or inside the fan body, remove the front grille by undoing the 12 screws. Wipe with a
damp cloth only. Replace the grille and re-fix using the screws.
4.3.
Should the motor, speed control box or the power lead require service or maintenance contact your local service agent.
4.4.
When not in use place the fan in its original box, or otherwise cover the fan to protect from dust, and store in a safe, dry, childproof location.
Declaration of Conformity
INDUSTRIAL HIGH VELOCITY
DRUM FAN - 36"
Model: HVD36
89/336/EEC EMC Directive
73/23/EEC Low Voltage Directive
93/68/EEC Marking Directive
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.
We, the sole importer into the UK, declare that the product listed here is in conformity with the following standards and directives.
The construction file for this product is held by the Manufacturer and may be inspected, by a
national authority, upon request to Jack Sealey Ltd.
Signed by Steve Buckle
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
23rd January 2006
01284 757500
01284 703534
For Jack Sealey Ltd.
Sole importer into the UK
of Sealey Power Products.
www.sealey.co.uk
Web
sales@sealey.co.uk
email
HVD36 - 1 - 230106
Advertisement
