Related Manuals for Eddy VT-1100
Summary of Contents for Eddy VT-1100
- Page 2 FEATURES OF HEAT GUN :::JI 1. Nozzle 2. Cooi air intake 3. Handle 4. Hanger 5. Switch 6. Power cord 7. Thermal control 8. Heat guard VARIABLE THERMAL CONTROL TURN LEFT RIGHT HIGH HIGH...
-
Page 3: Safety Instructions
IMPORTANT SAFETY I.NSTRUCTIONS Before starting work, please take a few minutes to carefully read all instructions. Pay close attention to safety guidelines and warnings included for your protection. Save these instructions for future use. WARNING '* To reduce risk of fire or electric shock, do not expose to rain or moisture.. Store indoors. - Page 4 Do not force the tool or accessories, and use only for the purpose intended. Always stand gun in an upright position or hang it up by its convenient hanger. * Never use the tool in wet environments or areas of high humidity (for example: bathroom,...
- Page 5 * Use in well-ventilated areas only. Peelings and residue from lead-based paints are poisonouse. POWER INFORMATION Be sure the power supply you are using agrees with the nameplate marking on the VT-1100 heat gun the guns are designed to run on 120 volt. GO-cycle. alternating current (ordinary house current).
- Page 6 3. All extension cords must have adequate wire size Before using any extension cord, inspect it closely for loose or exposed wires, damaged insulation, and/or defective fittings. Replace or repair any damaged cords. TECHNICAL DATA Model no. VT-1100 Watt 1200W MAX Voltage operating: 120 VOLTS 60Hz. LOW 250°F-HIGH 1100°F(120°C-590°C)
- Page 7 When ready to begin work, set power switch to on, and set variable heat control to desired temperature settings. With the VT-1100'heat gun, always allow a minute or so for it to reach its full operating temperature. Always wear protective gloves and eye protection.
- Page 8 Never concentrate tool's heat on a windowpanelor other glass surface. Note: The VT-1100 heat gun is designed to remove both oil-and latex-based paints and varnishes. It will not remove stains or primer coats that have impregnated the surface of wood.
-
Page 9: Optional Accessories
9. Shrinking PVC shrink-wrap sheeting for packaging pr:otection la.Waxing and dewaxing skis. l1.Shrinking polyvinyl wire joints. CARE AND MAINTI;NANCE Keep the air intake and outlet opening clean and free of dirt and debris. Use only a damp cloth and general household cleaning agent to wipe the gun clean.
Need help?
Do you have a question about the VT-1100 and is the answer not in the manual?
Questions and answers