Advertisement
PAIRING A BLUETOOTH DEVICE
1.Turn on the Bluetooth on your device.
2.Turn on the speaker, it will enter Bluetooth mode and you will hear a voice prompt, then the
unit will automatically go into pairing mode to search for Bluetooth device. You will know you
are in pairing mode when the "bt" on the display is flashing.
3. Navigate to your device's Bluetooth setup, find "RS68" and connect it. "bt" will stop
flashing if connected successfully.
4. If your device is not able to pair with the unit, check whether it has been connected with
another device, break the previous Bluetooth connection and reboot the Bluetooth.
Hold the PLAY/PAUSE button to disconnect the Bluetooth and re-enter pairing mode.
5. Note: You can connect the speaker with a smart phone, a tablet or a PC with Bluetooth.
Power Failure
1. Please check if the VOLUME/POWER knob is turned on.
2. Please charge the unit to make sure it is not out of power.
No Sound
1. Please check the volume with the VOLUME/POWER knob.
2. In AUX IN mode, please check your external audio device and the AUX cable.
3. In MIC mode, please check your microphone.
4. USB/TF No Sound: Please check if your TF/USB has music stored in it.
5. FM No Sound Or Sound Weak: Please move your speaker to a different location, the FM
station signal might be weak.
* For more questions/problems about the speaker and the operation, please contact our
support team via <support@radioddity.com>.
POWER SOURCE : DC 5V
POWER CONSUMPTION: 15W
FM FREQUENCY: 87.5-108 MHz
RANGE OF FREQUENCY: 60Hz - 20KHz
1* User Manual
1* USB Charging Cable
1* Wireless Microphone
TROUBLE SHOOTING
SPECIFICATION
2A
ACCESSORY
Advertisement
