Download Print this page
Diamond SeroFlow Plus Quick Start Manual

Diamond SeroFlow Plus Quick Start Manual

Pipette controller

Advertisement

Quick Links

Diamond
SeroFlow
®
Pipette Controller
Quick Start Guide
What's in the box:
• Quick Start Guide
• Diamond SeroFlow Plus
Pipette Controller
• 0.45µm filters (2ea)
• Power Adaptor
0. 45µm filter
Silicone
Adaptor
Name
Operating Triggers
LED Display
Coarse Speed Adjustment
Button (- / +)
Nose Cone & Silicone Adaptor
0. 45µm Filter
Battery Compartment Cover
Plus
Battery Compartment Cover
Nose Cone
Function
Analog triggers used to aspirate and dispense liquid. The rate of aspiration can be controlled by the
extent of force applied to each trigger.
The display shows both the battery charge state and the coarse speed setting.
The overall rate of aspiration and dispensing can be adjusted using these buttons.
The visible outer nose cone and interior silicone pipette adaptor that accept the serological pipettes.
Inline filter placed just above the nose cone, located internally between the pipette controller
components and silicone adaptor
Access cover for removing and replacing the rechargeable battery. Remove by pressing on the
textured area and sliding towards the rear of the unit. Replace by reversing this motion.
LED Display
Operating
Triggers
Coarse Speed
Adjustment
Button
Continued . . .

Advertisement

loading

Summary of Contents for Diamond SeroFlow Plus

  • Page 1 ® ™ Pipette Controller Quick Start Guide What’s in the box: LED Display • Quick Start Guide Battery Compartment Cover • Diamond SeroFlow Plus Pipette Controller • 0.45µm filters (2ea) • Power Adaptor Coarse Speed Adjustment 0. 45µm filter Button...
  • Page 2 Diamond SeroFlow Plus ® ™ Pipette Controller Quick Start Guide OPERATING INSTRUCTIONS IMPORTANT: The pipette controller cannot be operated without the internal filter in place. During operation, please do not overfill the serological pipette beyond its maximum level as this may contaminate the pipette controller and the internal filter.