Table of Contents
Advertisement
Quick Links
The information contained herein is confidential and may not be divulged
to any person or entity or reproduced, disseminated or disclosed, in
whole or in part. By receipt of this material including any exhibits,
attachments and spreadsheets the recipient agrees that the information
contained herein shall be kept confidential and shall not, without the prior
written consent of Doremi Laboratories, be disclosed by the recipient in
any manner.
MB_4K_Manual_000234_v1_3.doc
M4K.OM.000234.DRM
M B - 4 K
User Manual
Version 1.3
Page 1
Version 1.3
Doremi Labs, Inc Confidential
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Doremi MB-4K
- Page 1 By receipt of this material including any exhibits, attachments and spreadsheets the recipient agrees that the information contained herein shall be kept confidential and shall not, without the prior written consent of Doremi Laboratories, be disclosed by the recipient in any manner. MB_4K_Manual_000234_v1_3.doc Page 1 Version 1.3...
-
Page 2: Table Of Contents
ORMATS MB-4K F ........................7 RONT ANEL MB-4K C ......................7 SERS OF THE REAR PANEL CONNECTIONS ......................8 MB-4K SETUP ............................9 ....................9 ONNECTING VIA ETHERNET WITH SSH ......................9 HANGING THE ADDRESS ............................9 PDATING ........................10 EPORT GENERATION .......................... - Page 3 ONE (1) YEAR from the date of original retail purchase. If you discover a defect, Doremi will, at its option, repair, replace, or refund the purchase price of this product at no charge to you, provided you return it during the warranty period with transportation charges prepaid to your nearest Doremi Labs repair facility.
- Page 4 Customer (respectively, the "Software" and the "Documentation") on a single piece of Doremi Labs equipment at one site. The Software and the piece of Doremi Labs equipment must remain at the same location for the term of this license. The number of users of the Software is not limited and the users are not required to be personally identified to Licensor.
- Page 5 (d) All waivers must be in writing. Any waiver or failure to enforce any provision of this Agreement on one occasion will not be deemed a waiver of any other provision or of such provision on any other occasion. MB_4K_Manual_000234_v1_3.doc Page 5 Version 1.3 M4K.OM.000234.DRM Doremi Labs, Inc Confidential...
-
Page 6: Introduction
Section 1: Introduction – Overall presentation of the document • Section 2: MB-4K Presentation – Usage and characteristics of the MB-4K product • Section 3: Rear Panel Connections – Presentation of the MB-4K rear panel connections • Section 4: MB-4K Setup – Description of the setup/configurations supported. •... -
Page 7: Mb-4K Presentation
It also render subtitles and overlay them on the output pictures. Subtitle rendering necessitate the MB-4K and the DCP-2000 to be on the same network and the DCP-2000 to be configured to send the subtitles to the MB-4K IP address. -
Page 8: Rear Panel Connections
: 115200 bauds, 8 data bits, odd parity, 1 stop bit, no flow control. Use a RS232 to RS422 serial cable (also called at Doremi V1 to PC cable, provided with the unit) to connect from a PC. -
Page 9: Mb-4K Setup
You need to use the admin user for the ftp connection. The admin default ftp directory is /doremi. Then reboot the unit (from a ssh connection via Ethernet or from an serial connection via the RS232 port). The unit will be updated during the reboot. -
Page 10: Report Generation
To change or create a configuration file, use the following procedure: connect to the MB-4K via Ethernet using a ssh connection or via the RS232 serial port run the beluga_conf application with the configuration file name and the value to set it to... -
Page 11: All Outputs
By default the MB-4K output a 4K image (4096x2160) split in 4 separate 2K (2048x1080) quadrants, see 4.5.3 above. The MB-4K can be configured to output only the 2K image coming in on output 1. In that configuration, the other output should be discarded. -
Page 12: 48Fps Output
Note 1: Until firmware MB 0.01j (included) only the 4:4:4 12b XYZ output mode was supported. Note 2: in 2D (24fps) mode, the output is always 4:4:4 12b XYZ dual link. Note 3: To support a 4K 3D output or a 4K 48fps output, you need to use 2 MB-4K in parallel. 4.5.6 Input links Starting with firmware version MB 0.01k, the MB-4K auto detected which input (A or B) is the... - Page 13 B Figure 3: 3D/48fps Configuration using 2 MB-4K In the configuration shown in Figure 3, the second MB-4K is connected to the DCP-2000 with the input inverted. The output of each unit is shown in Table 1. 4:4:4 XYZ DualLink input (2D 24fps)
-
Page 14: Mb-4K Macros
5 MB-4K Macros The unit can be configured from a DCP-2000 via the sending of Macro during a ShowPlayList. This configuration would be similar to the Manual Configuration described above for the supported configurations. The supported Macros are described in the following sections. -
Page 15: Document Revision History
First version 08/16/2007 Support for admin ssh and configuration of Ethernet (soft 0.1.1-10 and later) 10/11/2007 Support configuration files (soft 0.1.2-8 and later) 07/17/2008 Support Macros and 2K All output. MB_4K_Manual_000234_v1_3.doc Page 15 Version 1.3 M4K.OM.000234.DRM Doremi Labs, Inc Confidential...
Need help?
Do you have a question about the MB-4K and is the answer not in the manual?
Questions and answers