Advertisement
Quick Links
CHANGING THE BATTERY
The SMARTLATCH TIME+TEMP uses a common AG10 (1.5 VDC)* micro alkaline battery.
TO REPLACE THE BATTERY:
1. Remove the battery door using a coin.
2. Using a small jeweller's screwdriver, remove the battery cover.
3. Place a fresh battery in the battery compartment with the
positive (+) side facing up.
4. Replace the battery cover and battery door.
*BATTERY MANUFACTURER SPECS:
Generic: AG10 (1.5 VDC)
Citizen: BLR54
Duracell: LR54
�
Eveready: 189
Maxell: LR1130
Ray-O-Vac: 189-1
Seiko: 89A
Vartra: V10GA
SLTT_InstructTT.indd 1-2
�
�
�
TECHTRAIL INC.
web:
email:
© 2006 TechTrail, Inc. All Rights Reserved.
85 CM
SmartLatch
TIME+TEMP
�
�
��������������� ����� ��� ��� ��������
www.techtrail.com
contacts@techtrail.com
COVER
USER GUIDE
2/24/06 10:12:04 AM
Advertisement
Summary of Contents for TECHTRAIL SmartLatch
- Page 1 CHANGING THE BATTERY The SMARTLATCH TIME+TEMP uses a common AG10 (1.5 VDC)* micro alkaline battery. TO REPLACE THE BATTERY: 1. Remove the battery door using a coin. 2. Using a small jeweller’s screwdriver, remove the battery cover. 3. Place a fresh battery in the battery compartment with the positive (+) side facing up.
- Page 2 4. PRESS the S2 key. SET HOUR by PRESSING the S1 key. NOTE: The SmartLatch Time+Temp is capable of displaying time in 12 or 24 hour formats. When setting hours, time will display 1 through 12 AM & PM, followed by 0 through 24.
Need help?
Do you have a question about the SmartLatch and is the answer not in the manual?
Questions and answers