Advertisement
Quick Links
Technical instruction
Manual for use and maintenance
ELECTRIC CONVECTION OVENS
MODELS
FK45 – FK45W – FK60 – FK60W – FK120 –
FK120W
These appliances comply with requirements of E.E.C EN 60335-1 / 72/23
SOTIRIOS D. PRODANAS & CO
PROFESSIONAL ELECTRIC & GAS MACHINES FOR RESTAURANT – PATISSERIES – SNACK BAR
OFFICE – FACTORY : National Road Kilkis-Thessaloniki P.C 545 00 Tel.: ++30 23410 41991 Fax: ++30 23410 41539
P.O Box 400 70, P.C : 560 00
www.north.gr
- e-mail :
info@north.gr
Advertisement
Summary of Contents for North FK45
- Page 1 Technical instruction Manual for use and maintenance ELECTRIC CONVECTION OVENS MODELS FK45 – FK45W – FK60 – FK60W – FK120 – FK120W These appliances comply with requirements of E.E.C EN 60335-1 / 72/23 SOTIRIOS D. PRODANAS & CO PROFESSIONAL ELECTRIC & GAS MACHINES FOR RESTAURANT – PATISSERIES – SNACK BAR OFFICE –...
-
Page 2: Specifications
CONVECTION OVEN & HUMIDITY FK45, FK60, FK120 FK45W, FK60W, FK120W SPECIFICATIONS The tables below refer to the specifications of models FK. Overall Dimensions MODEL LENGTH mm WIDTH mm HEIGHT mm FK45 FK60 FK120 FK45W FK60W FK120W Chamber Dimensions MODEL LENGTH mm WIDTH mm HEIGHT mm... - Page 3 • Sprinkler system for model’ s FK45W, FK60W, FK120W. Electrical Components • Wire heating elements: FK45 : : 2 x 3.000 Watt FK60 : 2 x 3.300 Watt FK120 : 4 x 2.000 Watt / 2 x 2.600 Watt FK45W :2 x 3.000 Watt FK60W : 2 x 3.300 Watt...
-
Page 4: General Information
1. GENERAL INFORMATION ⇒ This technical manual includes instructions for the installation, operation, care and maintenance of ovens type FK manufactured by NORTH. Please, read carefully and keep it for future reference. This manual should be referred to both by installing or service technicians and the operators of the equipment. -
Page 5: Technical Instructions
2. TECHNICAL INSTRUCTIONS INSTALLATION SERVICE INSTRUCTIONS NORTH CONVECTION OVENS ARE PROFESSIONAL EQUIPMENT. ALL ASSEMBLY AND CONNECTION PROCEDURES, TESTING AND REQUIRED REPAIRS MUST BE CARRIED OUT BY SPECIALIZED AND AUTHORIZED PERSONNEL ONLY......................NORTH ENTERPRISES CANNOT BE HELD RESPONSIBLE FOR ANY NEGATIVE CONSEQUENCES IN CASE OF INTERVENTIONS BY NON-SPECIALIZED TECHNICAL PERSONNEL OR DUE TO NONCOMPLIANCE WITH FACTORY INSTRUCTIONS. - Page 6 Connect the phases to L1, L2, L3. Connect neutral to 1 or 2. Connect the earth. Two-phases power supply (HO7RNF 4X2.5 – FK45/FK45W / FK60/FK60W) Connect the phases to L1 &L2 Connect neutral to N1 or N2 Connect the earth Single-phase power supply (HO7RNF 4X2.5 –...
- Page 7 2.3 POSSIBLE PROBLEM… ...… … … … … … … … … … … … … … … … … … … … .. Even if the appliance is used correctly, some problems may arise for various reasons. The table that follows mentions some possible problems and some possible causes.
- Page 8 2.5 TRAINING..................... The personnel who are to install and connect the appliance must train the users appropriately so that they can handle the operation and safety measures of the appliance. ATTENTION !!! • Check that main voltage in your working area is suitable for the settings on the label and that the appliance is properly earthed.
- Page 9 TESTING AND REQUIRED REPAIRS MUST BE CARRIED OUT BY SPECIALIZED AND AUTHORIZED PERSONNEL ONLY....................... NORTH ENTERPRISES CANNOT BE HELD RESPONSIBLE FOR ANY NEGATIVE CONSEQUENCES IN CASE OF INTERVENTIONS BY NON-SPECIALIZED TECHNICAL PERSONNEL OR DUE TO NONCOMPLIANCE WITH FACTORY INSTRUCTIONS.
- Page 10 3.1 TURNING ON THE APPLIANCE ............… … ..After making sure the appliance has been correctly connected to electricity, you can start using it. Thermostat. Depending on the heating requirement set the thermostat 0-300°C. Thermostat will control heating element and the chamber’ s temperature. During operation indicating lamp is on.