Related Manuals for St Helens GH919
Summary of Contents for St Helens GH919
- Page 1 GH919 / GH920 Christmas Tree Holder User Manual Please retain for future reference...
- Page 2 ASSEMBLY INSTRUCTIONS These Christmas Tree Holders are design to hold trees as follows: GH919, Trees Up to 2.1M & Trunk between 4 to 11cm GH920, Trees Up to 2.8M & Trunks between 4 to 11cm 1) Make sure the trunk of the tree measures more than 25cm (see diagram 1 overleaf).
- Page 3 2) Place the stand on a flat stable surface. To avoid scratches and markings to floor surfaces we recommend the use of a sturdy mat. 3) Push the teeth of the product upwards and rotate the holding assembly in a clockwise motion until it snaps into place. (see dia 2) 4) Remove the plastic protectors from the teeth of the product. 5) Whilst one person holds the tree upright, guide the bottom of the trunk over the middle of the stand.
- Page 4 6) Add water to the reservoir. 7) To release the tree hold the trunk of the tree firmly and rotate in an anti-clockwise direction until the teeth disengage from the trunk. To avoid the stand rotating at the same time place a foot onto the base. The tree should now be free of the stand. (see dia 4) SERVICE WARRANTY Electrovision guarantees the product free from defects in materials and...
Need help?
Do you have a question about the GH919 and is the answer not in the manual?
Questions and answers